Sony WEGA KV-20FS120, KV-24FS120 Operating Instructions Manual page 19

TV, Satellite Receiver, and VCR
Satellite
antenna
cable
1
Satellite Receiver
1
Connect the cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2
Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3
Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF
jack on your TV.
4
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your
satellite receiver to AUDIO and VIDEO IN on your VCR.
5
Using audio/video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR
to AUDIO and VIDEO IN on your TV.
Optional Connection
To view from the satellite receiver or VCR, select the video input to which your satellite
receiver or VCR is connected by pressing
4
5
Rear of TV
From
cable/
antenna
2
VCR
3
on the remote control.
Video (yellow)
Audio L (white)
Audio R (red)
11