Setup & Configuration; Connecting The Camera; Hdmi Monitor; Usb 3.0 Viewer - Toshiba SV-1000 User Manual

Video borescope system
Hide thumbs

Advertisement

Table of Contents
SETUP & CONFIGURATION

CONNECTING THE CAMERA

HDMI Monitor

1.
Remove the protective cap from the camera head connector. The connector is a pull release type connector; it may be
necessary to pull back on the connector to release the cap.
2.
Plug the camera head connector into the camera input on the CCU. Ensure that it is fully plugged in.
3.
Connect the HDMI output on the CCU to an external HDMI monitor using the included HDMI cable.
4.
Plug the 12V DC power adapter into the power input on the CCU. Plug the power adapter into a power source.
5.
Turn the power switch to ON on the CCU.
6.
Check that an image appears on the HDMI monitor.
7.
Adjust the LED light using the LED control knob on the CCU.
8.
Remove the camera head insertion tube from the protective coil.

USB 3.0 Viewer

1.
Remove the protective cap from the camera head connector. The connector is a pull release type connector; it may be
necessary to pull back on the connector to release the cap.
2.
Plug the camera head connector into the camera input on the CCU. Ensure that it is fully plugged in.
3.
Connect the included USB 3.0 cable (B type end) to the USB 3.0 connector on the CCU.
4.
Connect the USB 3.0 cable (A type end) to the viewing device. (viewing application software must be installed on the
compatible tablet or Windows PC)
5.
Plug the 12V DC power adapter into the power input on the CCU. Plug the power adapter into a power source.
6.
Turn the power switch to ON on the CCU.
7.
Launch the SV-1000 Viewer application as previously installed on the viewing device.
8.
Check that an image appears on the SV-1000 Viewer application.
9.
Adjust the LED light using the LED control knob on the CCU.
10. Remove the camera head insertion tube from the protective coil.
Note
SV-1000 Viewer application is compatible with Windows OS only. Viewing device must have USB 3.0 input for
compatibity.

VIEWER SOFTWARE

The SV-1000 Viewer is a Windows OS application that allows images and videos to be saved from the SV-1000 camera
system.
17

Advertisement

Table of Contents
loading

Table of Contents