bl E L8EEnK
I K 4 Y A O b l Contents of set value D1 (BCD 4 digits) are
output to YAO to YAF.
Set value setting pulse Y B I is turned
Program example for KD61 (high-speed counter unit) in remote l/O system
The input signals of KD61 in the system configuration example shown in Fig. 4.1 1 Correspond to
XAO to XBF and the output signals correspond to YAO to YBF in the master programmable
For presetting (changing temporary value), setting set value, and reading counter value of KD61, the
special timing pulses (F190 and F191) are utilized, and the, program used for this purpose is as
shown in Fig. 4.17.
Contents of DO (BCD 4 digits) are output to
YAO to YAF.
Counter preset pulse YBO i s turned on.
4.17 Program Example