Smartlink - Sony KV-21FX20D Instruction Manual

Optional Connections

Smartlink

Smartlink is a direct link between your TV set and a VCR.
For Smartlink you need:
• A VCR which supports Smartlink, NextView Link, Easy Link or
Megalogic.
Megalogic is a trademark of Grundig Corporation.
EasyLink is a trademark of Philips Corporation.
• A fully-wired 21 pin SCART cable to connect your VCR to Scart
:1/ connector.
The features of Smartlink are:
• Tuning information such as the channel overview are downloaded
from the TV set to the VCR.
• Direct TV recording: While watching TV you need to press just one
button on the VCR to record this programme.
• TV in standby mode: Press the "Play z" button on your VCR to
switch the TV automatically on.
If you have connected a decoder to a VCR which supports
Smartlink feature, select the menu MANUAL PROGRAMME in
the (SET UP) menu and select DECODER ON to each codified
channel.
For more information on Smartlink, please refer to the Instruction
Manual of your VCR.
Rear of TV
VCR
Optional Connections
23