Pioneer PDP-503CMX Product Training Manual page 71

Adjusting SCREEN (screen position)
The items that can be adjusted here are H.POSITION, V.POSITION, CLOCK, PHASE and V.SIZE.
1 Enter integrator mode and switch to the input (INPUT 1~5)
you want to adjust.
The set ID will be displayed on the upper right where the
" – –" mark is.
Select SCREEN and the item to adjust.
When DEFAULT is selected on screen 1, all adjustment
values for SCREEN will be restored to the factory preset
values.
2 Make the necessary adjustments.
(NOTE) CLOCK and PHASE can only be adjusted during
personal computer signal input.
Make adjustments using the 2 and 3 buttons on the remote
control or the main unit's operating panel.
The values adjusted here will be the initial values for menu
mode. Press the SET button to return to screen 1.
<Adjustable Range> 0 to 255 for H. POSITION, V. POSITION and CLOCK (initial value: 128)
<Adjusting Order>
0 to 127 for V. SIZE (initial value: 0)
0 to 63 for PHASE (initial value: 32)
For the sake of efficiency, make adjustments in the following order:
V.POSITION = H.POSITION = CLOCK = H.POSITION = PHASE = H.POSITION
Screen 1
I NTEGRATOR MENU
PICTURE WHITE BAL
]
SELECT
Screen 2
]
H. P O
SELECT
Integrator Mode
I NPUT 1
– –
SCREEN SET UP OPTION
H . POS I T I ON : 1 2 8
V . P O S I T I ON : 1 2 8
C L O C K : 1 2 8
P H A S E : 3 1
V S . I Z E : 0
D E AU L T F
SET ENTER MENU EXIT
S I T I ON : 1 2 8
EXIT
MENU
ADJUST
SET SET
71