Sound Adjustment - Sony FD Trinitron KV-29LS35K Instruction Manual

Fd trinitron colour television
Hide thumbs Also See for FD Trinitron KV-29LS35K:
Table of Contents

Advertisement

Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK

Sound Adjustment

Mode:
Personal
Treble
Bass
Balance
Reset
Dual Sound:
Mono
Detail Adjustment
OK
This menu also contains two submenus as following:
Mode
Detail Adjustment
• Treble and Bass can only be altered if "Personal" mode is selected.
• Select Reset and press OK to reset the sound to the factory preset levels.
• In case of a bilingual broadcast select Dual Sound and set A for sound channel 1, B for sound channel
2 or Mono for mono channel if available. For a stereo broadcast you can choose Stereo or Mono.
• If you are listening to the TV through headphones, "Dolby Virtual" option will automatically be
switched to "Off".
• If you switch "Dolby Virtual" to "On", the "Auto volume" option will automatically be switched to
"Off" and vice versa.
*
This TV has been designed to create the "Dolby Surround" sound effect by simulating the sound
of four speakers with two speakers, when the broadcast audio signal is Dolby Surround encoded.
The sound effect can also be improved by connecting a suitable external amplifier (for details refer
to "Connecting to external audio Equipment" on page 19).
*
Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D
symbol
are trademarks of Dolby Laboratories.
10
Menu System
SOUND ADJUSTMENT
The "Sound Adjustment" menu allows you to
alter the sound adjustments.
To do this: after selecting the item you want to
alter, press
/
Sound Adjustment
to store the new adjustment.
Mode:
Personal
Treble
Bass
Balance
Reset
Dual Sound:
Mono
Detail Adjustment
OK
Personal (for individual settings)
Rock
Pop
Jazz
*
Dolby
Virtual:
Off:
On:
Auto volume:
Off:
On:
TV Speakers:
Off:
On:
. then press repeatedly
or
to adjust it and finally press OK
Normal.
Simulates the sound effect of Dolby
Pro Logic surround.
Volume level changes according
to the broadcast signal.
Volume level of the channels will
stay the same, independent of the
broadcast signal (e.g. in the case of
advertisements).
Sound from external amplifier
connected to the audio outputs on
the rear of the TV set.
Sound from the TV set.
/
continued...

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents