Screen - Sony BRAVIA KDL-40WL140 Operating Instructions Manual

Display Area
Screen Position
Vertical Size
Screen settings for PC timings and HDMI-PC (PC input) differ from all other input modes and are shown below.
Auto Adjust
Reset
Phase
Pitch
H Center
V Center
Wide Mode
~
• Phase and Pitch options are not available with PC signal connected to HDMI input.
36
Full Pixel
Displays the picture for 1080i, 1080p or 1080/24p sources in its
original size.
Normal Displays the picture in its original size.
-1/-2
Enlarges the picture to hide the edges of the picture.
~
• For 720p, 1080i, 1080p and 1080/24p, feature is only available when Wide Mode is set
to Full.
Adjust the Vertical positioning by pressing V/v. Press B/b to adjust the Horizontal
positioning.
~
• Screen Position feature is useful if the TV is connected to game equipment.
• Vertical position is available only when Wide Mode is set to Zoom.
• For high-definition signals, Vertical and Horizontal positions are not available.
Adjusts the vertical size of a standard-definition picture.
~
• Vertical Size is available only when Wide Mode is set to Wide Zoom or Zoom for
standard-definition channels.
Select Yes to start the auto adjust for the PC input.
Resets the settings to the default values.
Adjust after Pitch to fine tune overall sharpness.
Adjust uneven sharpness on screen.
~
• For the PC input Signal Reference Chart, see page 14.
Allows you to move the position of the picture horizontally (left and right).
Allows you to move the position of the picture vertically (up and down).
Normal Select to display the picture in its original resolution and aspect ratio.
Full 1 Select to enlarge the picture to fill the screen, while maintaining its
original aspect ratio.
Full 2 Select to enlarge the picture to fill the screen.
~
• Wide Mode can also be accessed by pressing WIDE on the remote control.
• See WIDE button description on page 22 for accessing Wide Mode.