Getting Started; Installing The Tv; Preventing The Tv From Toppling Over - Sony Bravia KDL-40D3000, KDL-32XBR4 Operating Instructions Manual

Getting Started

1. Installing the TV

Preventing the TV from Toppling Over

TV
stand
1
Screw the support belt (supplied) to the TV
stand with a wood screw (supplied).
2
Attach the support belt to the Table-Top Stand
with the securing screw (supplied) using a
coin, etc.
3
Adjust the length by pulling the support belt
toward you while holding the Table-Top
Stand.
~
• Be sure to take measures to prevent the TV from
toppling over and causing injury.
• The supplied wood screw may not be used depending
on the type of TV stand. In this case, or when the
securing strength is not enough, use commercial
1 3
screws / to / inch (3 to 4 mm) diameter to fit to the
8 16
TV stand. Consult your dealer about the types of
screw(s).
Table-Top
Stand
2
3
1
11