Adjusting The Viewing Angle Of The Tv - Sony BRAVIA KDL-22L5000 Operating Instructions Manual

Item
6 VIDEO IN 1/
COMPONENT
IN 1
(1080p/1080i/
720p/480p/480i)/
L (MONO)-
AUDIO-R
7 COMPONENT
IN 2
(1080p/1080i/
720p/480p/480i)/
L-AUDIO-R
8 AUDIO OUT
(FIX) L/R
9 AC power cord Plug the cord into the nearest wall outlet.
0 CABLE/
ANTENNA
• An HDMI or Component video (YP
and 1080p video formats. 1080/24p is available only with HDMI connection. This TV displays all
picture format types in a resolution of 1,366 dots × 768 lines.

Adjusting the viewing angle of the TV

KDL-22L5000 only
This TV can be adjusted within the angle shown below.
Adjust the angle back and forth (tilt)
8
Description
This input port can be used as a composite video input (VIDEO 1) or as a
component video input (COMPONENT 1). For composite use, connect the yellow
jack to Y/Video for video and use audio L (mono) and R for audio signal. For
component connection, use Y, P
(mono) and R for audio signal.
This TV can auto detect and switch between the VIDEO 1 and COMPONENT 1
when VIDEO 1 or COMPONENT 1 is connected.
To set to auto detection, press MENU and go to the Setup settings. Select the
Video/Component 1 Selection option then set to Auto.
Component video provides better picture quality than the S Video and composite
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
Connects to the left and right audio input jacks of your analog audio equipment.
You can use these outputs to listen to your TV's audio through your stereo system.
RF input that connects to your Cable or VHF/UHF antenna.
P
B R
3˚
Right view
Front
, P for video signals and also connect the audio L
B R
) connection is required to view 480i, 480p, 720p, 1080i
8˚