Organizing The Ac Power Cord; Running Initial Setup - Sony BRAVIA 4-178-827-15(1) Setup Manual

3
Anchor the TV to the Wall
Anchor the TV to the wall by using bolts, wall
anchor and chain (or rope).
~
• Your TV is shipped with screws attached to the
rear of the TV. (They are fastened in the screw
holes for wall mounting.) Be sure to remove the
upper two screws prior to anchoring the TV on a
wall. (Except KDL-46EX713/46EX711/
46EX710/40EX713/40EX710/32EX710
models)
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow the
three measures recommended.
Anchor bolts (not supplied)
Wall-
mount
holes
Organizing the AC power
cord

Running initial setup

1
Complete your cable connections
before proceeding with the Initial
Setup.
Connect the TV to your nearest power
outlet.
2
Check the ENERGY SAVING
SWITCH setting is on (z).
Rope
3
Press POWER on the TV.
or
chain
When you switch the TV on for the first
(not
time, the Language menu appears on
supplied)
the screen.
Wall-anchor
(not supplied)
4
Follow the instructions on the screen.
~
• The ENERGY SAVING SWITCH must be
on (z) to set the clock and obtain program
information for the TV Guide.
• Home mode sets the TV to display the settings
optimized for home viewing (this setting is
ENERGY STAR compliant).
5
Select
channels and enable the
Screen
from a cable box or satellite receiver
and do not wish to use the TV's built-in
tuner, select
Selecting
On Screen
available when the TV's tuner is used.
~
• If you skip the channel scan while in the setup
menus, TV Guide will be disabled.
to scan for available
Continue
TV Guide On
® feature. If you receive channels
.
Skip
will disable the
Skip
feature, which is only
POWER
TV Guide
11