For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. It also contains information on the software license.
Page 3
Chapter Index Menu List Before You Begin First Steps Basic Photography and Playback Movie Recording and Playback Taking Photographs The Shooting Menus Playback and the Playback Menu The Setup Menus Shortcuts Peripherals and Optional Accessories Connections Technical Notes...
Menu List Camera menu options are listed below. Shooting Menus Adjust settings when shooting photos or movies. See page 87 for details. H IMAGE QUALITY SETTING G AF/MF SETTING IMAGE SIZE FOCUS AREA IMAGE QUALITY AF MODE RAW RECORDING STORE AF MODE BY ORIENTATION 102 FILM SIMULATION RAPID AF 1⁄3...
Page 5
Menu List A SHOOTING SETTING B MOVIE SETTING SELF-TIMER MOVIE MODE SAVE SELF-TIMER SETTING MOVIE AF MODE INTERVAL TIMER SHOOTING HDMI OUTPUT INFO DISPLAY AE BKT SETTING HDMI REC CONTROL 1⁄2 1⁄2 FILM SIMULATION BKT MIC LEVEL ADJUSTMENT FOCUS BKT MIC/REMOTE RELEASE PHOTOMETRY SHUTTER TYPE...
The Playback Menu Adjust playback settings. See page 135 for details. C PLAY BACK MENU C PLAY BACK MENU SWITCH SLOT RED EYE REMOVAL RAW CONVERSION VOICE MEMO SETTING ERASE COPY SIMULTANEOUS DELETE IMAGE TRANSFER ORDER 2⁄3 2⁄3 1⁄3 1⁄3 (RAW SLOT1/JPG SLOT2) WIRELESS COMMUNICATION PHOTOBOOK ASSIST...
Menu List Setup Menus Adjust basic camera settings. See page 155 for details. D USER SETTING D SCREEN SETTING FORMAT EVF BRIGHTNESS DATE/TIME EVF COLOR TIME DIFFERENCE EVF COLOR ADJUSTMENT LCD BRIGHTNESS Qa 1⁄3 1⁄3 LCD COLOR MY MENU SETTING LCD COLOR ADJUSTMENT SENSOR CLEANING IMAGE DISP.
Page 8
Menu List D BUTTON/DIAL SETTING D SAVE DATA SETTING FOCUS LEVER SETTING FRAME NO. EDIT/SAVE QUICK MENU SAVE ORG IMAGE FUNCTION (Fn) SETTING EDIT FILE NAME COMMAND DIAL SETTING CARD SLOT SETTING (STILL IMAGE) 1⁄2 1⁄2 SHUTTER AF SWITCH SLOT (SEQUENTIAL) SHUTTER AE MOVIE FILE DESTINATION SHOOT WITHOUT LENS...
Table of Contents Introduction ....................ii For the Latest Information ................... ii Menu List ......................iv Shooting Menus ......................iv The Playback Menu ....................vi Setup Menus ......................vii Supplied Accessories ................xix About This Manual ..................xx Symbols and Conventions .................xx Terminology ........................xx Before You Begin Before You Begin Parts of the Camera ..................2 The Serial Number Plate ..................5...
Page 10
Touch Screen Mode ................... 21 Shooting Touch Controls ................... 21 Playback Touch Controls ..................24 First Steps First Steps Attaching the Strap ................... 26 Attaching a Lens ..................28 Charging the Battery ................. 29 Inserting the Battery ................. 32 Inserting Memory Cards ................34 Using Two Cards ......................
Page 15
Table of Contents SHUTTER VOLUME ....................161 SHUTTER SOUND ....................161 PLAYBACK VOLUME .................... 161 SCREEN SETTING..................162 EVF BRIGHTNESS....................162 EVF COLOR ....................... 162 EVF COLOR ADJUSTMENT ................162 LCD BRIGHTNESS....................163 LCD COLOR ......................163 LCD COLOR ADJUSTMENT ................163 IMAGE DISP.
Page 16
POWER MANAGEMENT ................180 AUTO POWER OFF ....................180 SHOOTING STAND BY MODE ................ 180 AUTO POWER SAVE..................... 181 SAVE DATA SETTING ................182 FRAME NO........................ 182 SAVE ORG IMAGE ....................183 EDIT FILE NAME ..................... 183 CARD SLOT SETTING (STILL IMAGE)............183 SWITCH SLOT (SEQUENTIAL) .................
Page 17
Copying Pictures to a Computer ............... 227 Copying RAW Images in Other Formats: FUJIFILM X RAW STUDIO ........................228 Saving and Loading Camera Settings (FUJIFILM X Acquire) ..228 instax SHARE Printers ................229 Establishing a Connection ................229 Printing Pictures....................230...
Page 18
MyFinePix Studio....................234 RAW FILE CONVERTER EX ................234 FUJIFILM X RAW STUDIO ................. 235 FUJIFILM X Acquire ..................... 235 FUJIFILM Tether Shooting Plug-ins for Lightroom ......235 Hyper-Utility Software HS-V5 ............... 235 For Your Safety ...................236 Product Care ....................245 Cleaning the Image Sensor ..............246...
Supplied Accessories The following are included with the camera: • NP-T125 rechargeable battery • BC-T125 battery charger • Plug adapter • Body cap • Metal strap clips (× 2) • Clip attaching tool • Protective covers (× 2) • Shoulder strap •...
About This Manual This manual contains instructions for your FUJIFILM GFX 50R digital camera. Be sure you have read and understood its contents before proceeding. Symbols and Conventions The following symbols are used in this manual: Information that should be read to prevent damage to the product.
Parts of the Camera ON/OFF switch ..........37 Diopter adjustment control ......15 Shutter button ..........46 Strap eyelet ............26 Exposure compensation dial ....6, 79 Sync terminal ..........209 Fn1 button ............196 Lens signal contacts Dial lock release ..........5 Lens release button ........28 Shutter speed dial Fn2 button ............176 ..........
Page 23
Parts of the Camera Electronic viewfi nder (EVF)....10, 14, 15 Connector cover........31, 223 Eye sensor ............14 Speaker .............53, 161 VIEW MODE button ......... 14 Tripod mount b (delete) button .......... 48 Battery-chamber cover ........ 32 Focus mode selector ........65 Battery-chamber cover latch......
Page 24
Battery chamber ..........32 USB connector (Type-C) ......223 Battery latch ............ 33 15 V DC-IN connector ........31 The Cable Protector The cable protector prevents accidental disconnection of the USB cable or AC adapter. Attach the protector as shown and tighten the lock screw.
Parts of the Camera The Serial Number Plate Do not remove the serial number plate, which provides the FCC ID, KC mark, seri- al number, and other important informa- tion. Serial number plate The Focus Stick (Focus Lever) Tilt or press the focus stick to select the fo- cus area.
The Drive Button Pressing the drive button displays the fol- lowing drive mode options. Mode Mode Mode Mode B STILL IMAGE (single frame) DYNAMIC RANGE BKT (dynamic range bracketing) I CONTINUOUS (burst mode) Z FOCUS BKT (focus bracketing) O AE BKT (exposure bracketing) j MULTIPLE EXPOSURE W ISO BKT (sensitivity bracketing) F MOVIE...
Parts of the Camera The Command Dials Rotate or press the command dials to: Front command dial Rear command dial • Highlight menu items • Select menu tabs or page • Choose the desired combina- through menus tion of shutter speed and aper- •...
The Indicator Lamp Camera status is shown by the indicator lamp. Indicator lamp Indicator lamp Camera status Camera status Glows green Focus locked. Blinks green Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures. Additional pictures can be Blinks green and taken.
Parts of the Camera The LCD Monitor The LCD monitor can be tilted for eas- ier viewing, but be careful not to touch the wires or trap fi ngers or other objects behind the monitor. Touching the wires could cause camera malfunction. The LCD monitor also functions as a touch screen that can be used for: •...
Camera Displays This section lists the indicators that may be displayed during shooting. For illustrative purposes, displays are shown with all indicators lit. The Electronic Viewfi nder D EF GH J I KLM N O Q R S T 01/01/2018 10:00 AM...
Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes. Option Option Description Description Putting your eye to the viewfi nder turns the viewfi nder on and E EYE SENSOR EYE SENSOR the LCD monitor off ; taking your eye away turns the viewfi nder off...
Camera Displays Adjusting Display Brightness The brightness and hue of the viewfi nder and LCD monitor can be adjusted using the items in the D SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfi nder brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor.
The DISP/BACK Button The DISP/BACK button controls the display of indicators in the viewfi nder and LCD monitor. Indicators for the EVF and LCD must be selected separately. To choose the EVF dis- play, place your eye to the viewfi nder while using the DISP/BACK button.
Camera Displays LCD Monitor Standard indicators No indicators Dual display Info display (manual focus mode only) The Dual Display The dual display consists of a large full-frame window and a smaller close-up of the focus area.
Customizing the Standard Display To choose the items shown in the standard indicator display: Display standard indicators. Use the DISP/BACK button to display standard indicators. Select DISP. CUSTOM SETTING. Select D SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. Choose items.
Page 39
Camera Displays Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtu- al horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. For a 3D display (shown), press the function button to which ELECTRONIC LEVEL is assigned (P 174, 198).
Using the Menus To display the menus, press MENU/OK. Shooting Shooting Playback Playback PLAY BACK MENU IMAGE QUALITY SETTING IMAGE SIZE SWITCH SLOT RAW CONVERSION IMAGE QUALITY RAW RECORDING ERASE FILM SIMULATION SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) CROP GRAIN EFFECT COLOR CHROME EFFECT RESIZE DYNAMIC RANGE PROTECT...
Touch Screen Mode The LCD monitor also functions as a touch screen. Shooting Touch Controls To enable touch controls, select ON for TOUCH SCREEN SETTINGS D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/ TOUCH SCREEN ON/OFF EVF TOUCH SCREEN AREA SETTINGS OFF.
LCD Monitor Touch controls can be used to choose the focus area. The operation performed can be selected by tapping the touch screen mode indicator in the display to cycle through the following options. Mode Mode Description Description • In focus mode S (AF-S), the camera focuses when you tap your subject in the display.
Page 43
Touch Screen Mode Touch Function Functions can be assigned to the follow- ing fl ick gestures in much the same way as function buttons (P 196): • Flick up: T-Fn1 • Flick left: T-Fn2 • Flick right: T-Fn3 • Flick down: T-Fn4 In some cases, touch-function fl ick ges- MIC LEVEL ADJUSTMENT tures display a menu;...
Touch Screen Mode Playback Touch Controls When ON is selected for D BUTTON/DIAL SETTING > TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF, touch controls can be used for the following playback operations: • Swipe: Swipe a fi nger across the display to view other images.
Attaching the Strap Attach the strap clips to the camera and then attach the strap. Attach a protective cover. Place a protective cover over the eye- let as shown, with the black side of the cover toward the camera. Protective cover Open a strap clip.
Page 47
Attaching the Strap Place the strap clip on an eyelet. Hook the strap eyelet in the clip opening. Remove the tool, using the other hand to keep the clip in place. Keep the tool in a safe place, as you will need it to open the strap clips when removing the strap.
Lenses and Other Optional Accessories The camera can be used with lenses and accessories for the FUJIFILM G-mount. Observe the following precautions when attaching or removing (ex- changing) lenses.
Charging the Battery The battery is not charged at shipment. Before use, charge the battery in the supplied battery charger. • An NP-T125 rechargeable battery is supplied with the camera. • Charging takes about 140 minutes. Connect the plug adapter. The plug adapter supplied with the camera varies with the coun- try or region of purchase;...
Page 50
The Charging Indicator The charging indicator shows battery charge status as follows: Charging indicator Charging indicator Battery status Battery status Action Action Battery not inserted. Insert the battery. Off Battery fully charged. Remove the battery. Battery charging. — Unplug the charger and Blinks Battery fault.
Page 51
Charging the Battery Charging via AC Adapter The battery inserted in the camera will also charge when the camera is powered by an optional AC-15V AC adapter. Charging takes about 120 min- utes. Battery charge status is shown by battery status icons when the camera is on (playback mode) and by the indicator lamp when the camera is off .
Inserting the Battery After charging the battery, insert the battery in the camera as described below. Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-cham- ber cover. • Do not open the battery-chamber cover when the camera is on. Fail- ure to observe this precaution could damage image fi les or memory cards.
Page 53
Inserting the Battery Close the battery-chamber cover. Close and latch the cover. If the cover does not close, check that the battery is in the correct orienta- tion. Do not attempt to force the cov- er shut. Removing the Battery Before removing the battery, turn the camera off and open the battery-cham- ber cover.
Inserting Memory Cards Pictures are stored on memory cards (sold separately). The camera can be used with two cards, one in each of its two slots. Open the memory card slot cover. Unlatch and open the cover. Do not open the memory card-slot cover when the camera is on. Failure to observe this precaution could damage image fi les or memory cards.
Inserting Memory Cards Removing Memory Cards Before removing memory cards, turn the camera off and open the memory card slot cover. Press and release the card to eject it part way (to prevent the card falling from the slot, press the center of the card and release it slowly, without removing your fi nger from the card).
• A list of supported memory cards is available on the Fujifi lm website. For details, visit: http://www.fujifilm.com/support/digital_cameras/compatibility/. • Do not turn the camera off or remove the memory card while the memo- ry card is being formatted or data are being recorded to or deleted from the card.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off . Slide the switch to ON to turn the camera on, or to OFF to turn the camera off . Fingerprints and other marks on the lens or viewfi nder can aff ect pic- tures or the view through the viewfi nder.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: Indicator Indicator Description Description Battery partially discharged. Battery about 80% full. Battery about 60% full. Battery about 40% full. Battery about 20% full.
If you intend to pair the camera with a smartphone or tablet, install and launch the latest version of the FUJIFILM Camera Remote App on the smart device before proceeding. For more information, visit: http://app.fujifilm-dsc.com/en/camera_remote/...
Page 60
Check the time. When pairing is complete, you will be PAIRING REGISTRATION prompted to set the camera clock to PAIRING COMPLETE the time reported by the smartphone 1/ 1/2018 12:00 PM or tablet. Check that the time is cor- SET DATE/TIME FROM SMARTPHONE? rect.
Basic Setup Choosing a Diff erent Language To change the language: Display language options. Select D USER SETTING > Qa. Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: Display DATE/TIME options. Select D USER SETTING >...
Taking Photographs (Mode P) This section describes how to take pictures using program AE (mode P). See pages 56–63 for information on S, A, and M modes. Adjust settings for program AE. Setting Setting Aperture A (auto) Shutter speed A (auto) Focus mode S (single AF) To use the shutter speed dial, press the dial lock release and rotate...
Page 65
Taking Photographs (Mode P) Ready the camera. • Hold the camera steady with both hands and brace your elbows against your sides. Shaking or un- steady hands can blur your shots. • To prevent pictures that are out of focus or too dark (underexposed), keep your fi ngers and other objects away from the lens and AF-assist illuminator.
Page 66
Taking Photographs (Mode P) Focus. Press the shutter button halfway to focus. Focus indicator Focus frame • If the camera is able to focus, it will beep twice and focus frame and focus indicator will glow green. • If the camera is unable to focus, the focus frame will turn red, s will be displayed, and the focus indicator will blink white.
Viewing Pictures Pictures can be viewed in the viewfi nder or LCD monitor. To view pictures full frame, press a. 100-0001 Additional pictures can be viewed by pressing the focus stick (fo- cus lever) left or right or rotating the front command dial. Press the focus stick or rotate the dial right to view pictures in the order recorded, left to view pictures in reverse order.
Deleting Pictures Use the b button to delete pictures. Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. With a picture displayed full frame, press the b button and select FRAME.
Recording Movies This section describes how to fi lm movies in auto mode. Press the drive button and select F MOVIE. Adjust settings for program AE. Setting Setting Aperture A (auto) Shutter speed A (auto) Focus mode S (single AF) To use the shutter speed dial, press the dial lock release and rotate the dial to the desired setting.
Page 71
Recording Movies Press the button again to end recording. Recording ends automatically when the maximum length is reached or the memory card is full. • Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording. •...
Recording Movies Adjusting Movie Settings • Frame size and rate can be selected using B MOVIE SETTING > MOVIE MODE. • To choose the card used to store movies, use D SAVE DATA SET-UP > MOVIE FILE DESTINATION. • Focus mode is selected using the focus mode selector; for con- tinuous focus adjustment, select C, or choose S and enable In- telligent Face Detection.
Viewing Movies View movies on the camera. 01/01/2018 10:00 AM In full-frame playback, movies are identi- fi ed by a W icon. Press the focus stick (fo- cus lever) down to start movie playback. PLAY PLAY +1.0 12800 The following operations can be per- formed while a movie is displayed: Focus stick Focus stick...
Page 74
Viewing Movies Playback Speed Press the focus stick (focus lever) left or right to 29m59s 29m59s adjust playback speed during playback. Speed is shown by the number of arrows (M or N). Arrows...
P, S, A, and M Modes P, S, A, and M modes give you varying degrees of control over shutter speed and aperture. Mode P: Program AE Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift.
Page 77
P, S, A, and M Modes Program Shift If desired, you can rotate the rear command dial to select other combinations of shutter speed and aperture without altering exposure (pro- gram shift). Aperture Shutter speed Program shift is not available in any of the following circumstances: •...
Mode S: Shutter-Priority AE Choose a shutter speed and let the camera adjust aperture for optimal exposure. Setting Setting Shutter speed User-selected Aperture A (auto) Confi rm that S appears in the display. • If the correct exposure cannot be achieved at the selected shutter speed, aperture will be displayed in red.
Page 79
P, S, A, and M Modes Time (T) Rotate the shutter speed dial to T (time) to choose slow shutter speeds for long time-exposures. Use of a tripod is recommended to prevent the camera moving during the exposure. Rotate the shutter speed dial to T. Rotate the rear command dial to choose a shutter speed.
Page 80
Bulb (B) Select a shutter speed of B (bulb) for long time-exposures in which you open and close the shutter manually. Use of a tripod is recommended to prevent the camera moving during the ex- posure. Rotate the shutter speed dial to B. Press the shutter button all the way down.
P, S, A, and M Modes Mode A: Aperture-Priority AE Choose an aperture and let the camera adjust shutter speed for optimal exposure. Setting Setting Shutter speed A (auto) Aperture User-selected Confi rm that A appears in the display. • If the correct exposure cannot be achieved at the selected aperture, shutter speed will be displayed in red.
Mode M: Manual Exposure In manual mode, the user controls both shutter speed and aperture. Shots can be deliberately overexposed (brighter) or underexposed (darker), opening the door for a variety of individual creative ex- pression. The amount the picture would be under- or over-exposed at current settings is shown by the exposure indicator;...
Page 83
P, S, A, and M Modes Exposure Preview To preview exposure in the LCD monitor, select an option other than OFF for D SCREEN SET-UP > PREVIEW EXP./WB IN MANUAL MODE. Select OFF when using the fl ash or on other occasions on which ex- posure may change when the picture is taken.
Take pictures using autofocus. Rotate the focus mode selector to S or C (P 65). Choose an AF mode (P 67). Choose the position and size of the focus frame (P 69). Take pictures. For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.html...
Autofocus Focus Mode Use the focus mode selector to choose how the camera focuses. Choose from the following options: Mode Mode Description Description Single AF: Focus locks while the shutter button is pressed halfway. (AF-S) Choose for stationary subjects. Continuous AF: Focus is continually adjusted to refl ect changes in the distance to the subject while the shutter button is pressed halfway.
Page 86
The Focus Indicator Focus status is shown by the focus indicator. Focus indicator Focus indicator Focus status Focus status Camera focusing. Subject in focus; focus locked (focus z (lights green) mode S). Subject in focus (focus mode C). (z) (lights green) Focus is automatically adjusted for Focus indicator changes in distance to subject.
Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes S and C. Press a function button (by default, Fn5) to display AF mode options. Choose an AF mode. • The Fn5 button can be assigned other roles using D BUTTON/DIAL SETTING >...
Page 88
Option Option Description Description Sample image Sample image Camera focuses automatically on high-contrast subjects; display WIDE/TRACKING shows areas in focus. Focus Mode C (AF-C) Focus Mode C (AF-C) Option Option Description Description Sample image Sample image Focus tracks subject at selected fo- cus point.
Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display Press MENU/OK and go to the shooting menu. Select G AF/MF SETTING > FOCUS AREA to view the fo- cus-point display. Use the focus stick (focus lever) and rear command dial to choose a focus area.
Page 90
The Focus-Point Display The focus-point display varies with the option selected for AF mode. Focus frames are shown by small squares (), focus zones by the large squares. AF mode AF mode r SINGLE POINT y ZONE z WIDE/TRACKING SINGLE POINT ZONE WIDE/TRACKING Number of points avail-...
Page 91
Autofocus Checking Focus To zoom in on the current focus area for precise focus, press the center of the rear command dial. Use the focus stick (focus lever) to choose another focus area. Press the center of the rear command dial again to cancel zoom. Normal display Focus zoom •...
Manual Focus Adjust focus manually. Rotate the focus mode selector to M. j will appear in the display. Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. Take pictures. • Use D BUTTON/DIAL SETTING >...
Page 93
Manual Focus Quick Focus • To use autofocus to focus on the subject in the selected focus area, press the button to which focus lock or AF-ON has been assigned (the size of the focus area can be chosen with the rear command dial). •...
Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator The manual focus indicator indicates how closely the focus distance matches the distance to the subject in the focus brackets. The white line indicates the distance to the subject in the focus area (in meters or feet according to the option Focus distance...
Page 95
Manual Focus Focus Zoom If ON is selected for G AF/MF SETTING > FOCUS CHECK, the camera will automatically zoom in on the selected focus area when the focus ring is rotated. Press the center of the rear com- mand dial to exit zoom. •...
Sensitivity Adjust the camera’s sensitivity to light. Adjust ISO sensitivity using a function button (by default, Fn1). Option Option Description Description Sensitivity is automatically adjusted in response to shooting AUTO1 conditions according to combination of standard and max- AUTO2 imum sensitivity and minimum shutter speed chosen for A SHOOTING SETTING ...
Metering Choose how the camera meters exposure. A SHOOTING SETTING > PHOTOMETRY off ers a choice of the following metering options: The selected option will only take eff ect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode Mode Description...
Exposure Compensation C (Custom) When the exposure compensation dial is rotated to C, you can adjust exposure compensation after pressing a function button (by default, Fn2). Rotate the front command dial to choose a value. • The Fn2 button can be assigned other roles using D BUTTON/DIAL SETTING >...
Focus/Exposure Lock Focus and exposure lock when the shutter button is pressed halfway. Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock).
Focus/Exposure Lock The AF-L and AE-L Buttons Focus and exposure can also be locked using function buttons. At default set- tings, the Fn3 button locks exposure, the Fn4 button focus. • While the assigned control is pressed, pressing the shutter button halfway will Fn3 button not end the lock.
Bracketing Automatically vary settings over a series of pictures. Press the drive button and choose from the options below. O AE BKT Use A SHOOTING SETTING > AE BKT SETTING to choose the bracketing amount, bracketing order, and number of shots. Each time the shutter button is pressed, the camera will take the spec- ifi ed number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the select-...
Bracketing V WHITE BALANCE BKT Select a bracketing amount (±1, ±2, or ±3) in the drive mode dis- play. Each time the shutter is released, the camera takes one shot and processes it to create three copies: one at the current white balanced setting, one with fi ne-tuning increased by the selected amount, and another with fi ne-tuning decreased by the selected amount.
Continuous Shooting (Burst Mode) Capture motion in a series of pictures. Press the drive button and select I CONTINUOUS. The camera will take pictures while the shutter button is pressed; shooting ends when the shutter button is released or the memory card is full.
Multiple Exposures Create a photograph that combines two exposures. Press the drive button and select j MULTIPLE EXPOSURE. Take the fi rst shot. Press MENU/OK. The fi rst shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot.
IMAGE QUALITY SETTING Adjust image quality settings. To display image quality settings, press IMAGE QUALITY SETTING IMAGE SIZE MENU/OK in the shooting display and se- IMAGE QUALITY RAW RECORDING lect the H (IMAGE QUALITY SETTING) FILM SIMULATION GRAIN EFFECT tab. COLOR CHROME EFFECT DYNAMIC RANGE WHITE BALANCE...
RAW images are compressed using a reversible algorithm that reduces fi le size with no loss of image data. The images can be LOSSLESS viewed in RAW FILE CONVERTER EX (P 234), FUJIFILM X RAW COMPRESSED STUDIO (P 235), or other software that supports “lossless”...
(G) fi lter deepens reds and browns, including skin tones, making it a good choice for portraits. • Film simulation options can be combined with tone and sharpness settings. • Film simulation settings can also be accessed via shortcuts (P 192). • For more information, visit: http://fujifilm-x.com/en/x-stories/the-world-of- film-simulation-episode-1/...
IMAGE QUALITY SETTING GRAIN EFFECT Add a fi lm grain eff ect. Select an amount (STRONG or WEAK) or choose OFF to turn fi lm grain off . Options Options STRONG WEAK COLOR CHROME EFFECT Deepen colors in shadows. Select an amount (STRONG or WEAK) or choose OFF to turn the eff ect off .
DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights when photographing high-contrast scenes. Higher values are recommended for scenes that include both sunlight and deep shade, for such high-contrast subjects as sunlight on water, brightly-lit autumn leaves, and portraits taken against a blue sky, and for white objects or people wearing white.
IMAGE QUALITY SETTING WHITE BALANCE For natural colors, choose a white balance option that matches the light source. Option Option Description Description AUTO White balance is adjusted automatically. k/l/m Measure a value for white balance. Choose a color temperature. For subjects in direct sunlight. For subjects in the shade.
Page 114
Custom White Balance Choose k, l, or m to adjust white CUSTOM 1 balance for unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fi lls the display and press the shutter SHUTTER : NEW WB button all the way down to measure white SHIFT...
Page 115
IMAGE QUALITY SETTING k: Color Temperature Selecting k in the white balance menu WHITE BALANCE displays a list of color temperatures; highlight a color temperature and press COLOR TEMPERATURE 10000 MENU/OK to select the highlighted option R:0 B:0 9100 8300 and display the fi ne-tuning dialog.
HIGHLIGHT TONE Adjust the appearance of highlights. Options Options −1 −2 SHADOW TONE Adjust the appearance of shadows. Options Options −1 −2 COLOR Adjust color density. Options Options −1 −2 −3 −4 SHARPNESS Sharpen or soften outlines. Options Options −1 −2 −3 −4...
IMAGE QUALITY SETTING NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Options Options −1 −2 −3 −4 LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures. Options Options LENS MODULATION OPTIMIZER Select ON to improve defi nition by adjusting for diff raction and the slight loss of focus at the periphery of the lens.
PIXEL MAPPING Use this option if you notice bright spots in your pictures. Press MENU/OK in the shooting display and select the H IMAGE QUALITY SETTING tab. Highlight PIXEL MAPPING and press MENU/OK to perform pix- el mapping. • Results are not guaranteed. •...
IMAGE QUALITY SETTING EDIT/SAVE CUSTOM SETTING Save up to 7 sets of custom camera settings for commonly-en- countered situations. Saved settings can be recalled using H IMAGE QUALITY SETTING > SELECT CUSTOM SETTING. Press MENU/OK in shooting mode to display the shooting menu.
AF/MF SETTING Adjust focus settings. To display focus settings, press MENU/OK AF/MF SETTING FOCUS AREA in the shooting display and select the AF MODE STORE AF MODE BY ORIENTATION G (AF/MF SETTING) tab. RAPID AF AF POINT DISPLAY NUMBER OF FOCUS POINTS PRE-AF AF ILLUMINATOR EXIT...
AF/MF SETTING AF MODE Choose the AF mode for focus modes S and C. Option Option Description Description The camera focuses on the subject in the selected focus point. The number of focus points available can be selected using G AF/MF SETTING >...
STORE AF MODE BY ORIENTATION Choose whether the focus mode and focus area used when the camera is in portrait orientation are stored separately from those used when the camera is in landscape orientation. Option Option Description Description The same settings are used in both orientations. FOCUS AREA ONLY The focus area for each orientation can be selected separately.
AF/MF SETTING NUMBER OF FOCUS POINTS Choose the number of focus points available for focus-point se- lection in manual focus mode or when SINGLE POINT is selected for AF MODE. Option Option Description Description 117 POINTS Choose from 117 focus points arranged in a 9- by 13-point grid. (9 ×...
FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that empha- size portrait subjects. You can also choose whether the camera detects and focuses on eyes when Intelligent Face Detection is on.
AF/MF SETTING AF+MF If ON is selected in focus mode S and focus has been locked (whether by pressing the shutter button halfway or by other means), focus lock can be ended and focus adjusted manually by rotating the focus ring. Options Options •...
MF ASSIST Choose how focus is displayed in manual focus mode. Option Option Description Description STANDARD Focus is displayed normally. FOCUS PEAK The camera heightens high-contrast outlines. Choose a color and HIGHLIGHT peaking level. You can also choose MF assist options by holding the center of the rear command dial.
AF/MF SETTING INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for AF MODE and SPOT is selected for PHOTOMETRY. Options Options INSTANT AF SETTING Choose whether the camera focuses using single AF (AF-S) or continuous AF (AF-C) when a button to which focus lock or AF-ON is assigned is pressed in manual focus mode.
DEPTH-OF-FIELD SCALE Choose FILM FORMAT BASIS to help you make practical assess- ments of depth of fi eld for pictures that will be viewed as prints and the like, PIXEL BASIS to help you assess depth of fi eld for pictures that will be viewed at high resolutions on computers or other electronic displays.
AF/MF SETTING TOUCH SCREEN MODE Choose the focus operations performed using touch controls. Still Photography Mode Mode Description Description • In focus mode S (AF-S), the camera focuses when you tap your subject in the display. Focus locks at the current distance until you tap the AF OFF icon.
Page 130
AF/MF SETTING Touch Controls for Focus Zoom Diff erent touch controls are used during focus zoom (focus check enabled). Central Area Central Area Tapping the center of the display performs the operations below. Mode Mode AF-S AF-S MF MF AF AF Instant AF AREA AREA...
SHOOTING SETTING Adjust shooting options. To display shooting options, press SHOOTING SETTING SELF-TIMER MENU/OK in the shooting display and se- SAVE SELF-TIMER SETTING INTERVAL TIMER SHOOTING lect the A (SHOOTING SETTING) tab. AE BKT SETTING FILM SIMULATION BKT FOCUS BKT PHOTOMETRY SHUTTER TYPE EXIT...
SAVE SELF-TIMER SETTING If ON is selected, the chosen self-timer setting will remain in ef- fect after a picture is taken or the camera is turned off . Options Options INTERVAL TIMER SHOOTING Confi gure the camera to take photos automatically at a preset interval.
Page 133
SHOOTING SETTING Interval timer photography cannot be used with multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. • Use of a tripod is recommended. • Check the battery level before starting. We recommend using an op- tional AC-15V AC power adapter.
AE BKT SETTING Adjust exposure bracketing settings. Option Option Description Description Choose the number of shots in the bracketing sequence and the amount exposure is varied with each shot. • FRAMES: Choose the number of shots in the bracketing FRAMES/STEP SETTING sequence.
SHOOTING SETTING FOCUS BKT Adjust focus bracketing settings. Option Option Description Description FRAMES Choose the number of shots. STEP Choose the amount focus changes with each shot. INTERVAL Choose the interval between shots. Do not adjust zoom during shooting. Focus and FRAMES/STEP The relation between focus and the options chosen for FRAMES and STEP is shown in the illustration.
PHOTOMETRY Choose how the camera meters exposure. The selected option will only take eff ect when G AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF. Mode Mode Description Description The camera instantly determines exposure based on an anal- ysis of composition, color, and brightness distribution. Rec- MULTI ommended in most situations.
SHOOTING SETTING SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound. Option Option Description Description t MECHANICAL SHUTTER Take pictures with the mechanical shutter. s ELECTRONIC SHUTTER Take pictures with the electronic shutter. t E-FRONT CURTAIN The camera chooses the mechanical or electronic SHUTTER front curtain shutter according to shooting conditions.
FLICKER REDUCTION Select ON to reduce fl icker in pictures and the display when shoot- ing under fl uorescent lighting and other similar light sources. Options Options • Enabling fl icker reduction disables the electronic shutter and increas- es the time needed to record pictures. •...
SHOOTING SETTING Adjust the camera’s sensitivity to light. Option Option Description Description Sensitivity is automatically adjusted in response to shooting AUTO1 conditions according to combination of standard and max- AUTO2 imum sensitivity and minimum shutter speed chosen for A SHOOTING SETTING > ISO. Choose from AUTO1, AUTO3 AUTO2, and AUTO3 (P 120).
Page 140
AUTO Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Default Default Item Item Options Options AUTO1 AUTO1 AUTO2 AUTO2 AUTO3 AUTO3 DEFAULT SENSITIVITY 12800–100 MAX. SENSITIVITY 12800–200 1600 3200 MIN. SHUTTER SPEED ⁄–¼ SEC ⁄ SEC The camera automatically chooses a sensitivity between the de- fault and maximum values;...
SHOOTING SETTING MOUNT ADAPTER SETTING Adjust settings for lenses attached via a mount adapter. Shutter Select When using lenses with an internal shutter, choose whether to use the shutter on the camera (BODY) or the lens (LENS). This option may have no eff ect with some lenses. Saved Settings Store settings for up to 6 lenses, or choose OFF to disable correc- tions for focal length, distortion, color shading, and peripheral...
Page 142
Color Shading Correction Color Shading Correction Color (shading) variations between the center and edges of the frame can be ad- justed separately for each corner. To use color shading correction, follow the steps below. NEXT Rotate the rear command dial to choose a corner. The select- ed corner is indicated by a triangle.
The H IMAGE QUALITY SETTING > IMAGE SIZE item in the shoot- ing menu is fi xed at O 3 : 2. WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: •...
FLASH SETTING Adjust fl ash-related settings. To display fl ash-related settings, press FLASH SETTING MENU/OK in the shooting display and se- FLASH FUNCTION SETTING RED EYE REMOVAL lect the F (FLASH SETTING) tab. TTL-LOCK MODE LED LIGHT SETTING The options available vary with the shoot- MASTER SETTING CH SETTING ing mode selected.
FLASH SETTING TTL-LOCK MODE Instead of adjusting fl ash level with each shot, TTL fl ash control can be locked for consistent results across a series of photo- graphs. Option Option Description Description Flash output is locked at the value metered for the most LOCK WITH LAST FLASH recent photo.
FLASH SETTING MASTER SETTING Choose a fl ash group (A, B, or C) for the fl ash mounted on the camera hot shoe when it functions as a master fl ash controlling remote fl ash units via Fujifi lm wireless optical fl ash control, or choose OFF to limit master fl ash output to a level that does not aff ect the fi nal picture.
MOVIE SETTING Adjust movie-recording options. To display options for movie recording, MOVIE SETTING press MENU/OK in the shooting display and MOVIE MODE MOVIE AF MODE select the B (MOVIE SETTING) tab. HDMI OUTPUT INFO DISPLAY HDMI REC CONTROL The options available vary with the shoot- MIC LEVEL ADJUSTMENT ing mode selected.
MOVIE SETTING HDMI REC CONTROL Choose whether the camera sends movie start and stop signals to the HDMI device when the shutter button is pressed to start and stop movie recording. Options Options MIC LEVEL ADJUSTMENT Adjust the recording level for the built-in MIC LEVEL ADJUSTMENT and external microphones.
The Playback Display This section lists the indicators that may be displayed during playback. For illustrative purposes, displays are shown with all indicators lit. B C D E 01/01/2018 10:00 AM Date and time ......... 39, 41, 157 Film simulation ..........90 Bluetooth ON/OFF ........185 Dynamic range ..........
The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off 01/01/2018 10:00 AM 1/1000 12800 +1.0 FAVORITES Favorites Info display The Info Display In the info display, you can press the focus stick (focus lever) up to cycle through a series of information and histogram displays.
Page 152
The Playback Display Viewing Photo Information The photo information display changes each time the focus stick (focus lever) is pressed up. Basic data Histogram NEXT NEXT 01/01/2018 10:00 AM 1/1000 12800 +1.0 1/1000 12800 +1.0 BACK NEXT Info display 2 Info display 1 Zooming in on the Focus Point Press the center of the rear command dial to zoom in on the focus point.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the rear command dial to go from full-frame playback to playback zoom or multi-frame playback. Full-frame playback 100-0001 Multi-frame Playback playback zoom DISP/BACK MENU/OK Nine-frame view Medium zoom Hundred- frame view Maximum zoom...
Viewing Pictures Playback Zoom Rotate the rear command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK, or the center of the rear command dial. • The maximum zoom ratio varies with the option selected for H IMAGE QUALITY SETTING >...
The Playback Menu Adjust playback settings. The playback menu is displayed when PLAY BACK MENU SWITCH SLOT you press MENU/OK in playback mode. RAW CONVERSION ERASE SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) CROP RESIZE PROTECT IMAGE ROTATE EXIT SWITCH SLOT Choose the card from which images will be played back. If two memory cards are inserted, you can press and hold the a but- ton to choose a card for playback.
RAW CONVERSION Even if you don’t have a computer, you can use the camera to modify RAW pictures and save them in JPEG or TIFF format. Saving RAW Pictures in Another Format Display a RAW picture. Highlight RAW CONVERSION in the playback menu. Press MENU/OK.
Page 157
The Playback Menu The settings that can be adjusted when converting pictures from RAW to another format are: Setting Setting Description Description Create a copy using the settings in eff ect at the time REFLECT SHOOTING COND. REFLECT SHOOTING COND. the photo was taken.
ERASE Delete individual pictures, multiple selected pictures, or all pic- tures. Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option Option Description Description FRAME Delete pictures one at a time. SELECTED FRAMES Delete multiple selected pictures.
Page 159
The Playback Menu SELECTED FRAMES Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select. • Selected pictures are indicated by check marks (R). • To deselect a highlighted picture, press MENU/OK again. When the operation is complete, press DISP/BACK to display a confi rmation dialog.
SIMULTANEOUS DELETE(RAW SLOT1/JPG SLOT2) Taking photos with RAW / JPEG selected for D SAVE DATA SET-UP > CARD SLOT SETTING (STILL IMAGE) creates two copies. Choose whether deleting the RAW image will also delete the JPEG copy. Option Option Description Description Deleting the RAW image from the card in Slot 1 also deletes the JPEG copy from the card in Slot 2.
The Playback Menu RESIZE Create a small copy of the current picture. Display the desired picture. Select RESIZE in the playback menu. Highlight a size and press MENU/OK to display a confi rmation dialog. Press MENU/OK again to save the resized copy to a separate fi le.
PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. Option Option Description Description Protect selected pictures. Press the focus stick (focus lever) left or FRAME right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
The Playback Menu IMAGE ROTATE Rotate pictures. Display the desired picture. Select IMAGE ROTATE in the playback menu. Press the focus stick (focus lever) down to rotate the picture 90° clockwise, up to rotate it 90° counterclockwise. Press MENU/OK. The picture will automatically be displayed in the selected orientation whenever it is played back on the camera.
RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the im- age; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. Display the desired picture. Select RED EYE REMOVAL in the playback menu. Press MENU/OK.
The Playback Menu VOICE MEMO SETTING Add a voice memo to the current photograph. Select ON for VOICE MEMO SETTING in the playback menu. Display a photo to which you wish to add a voice memo. Press and hold the Fn2 button to record the memo. Record- ing ends after 30 s or when you release the button.
COPY Copy pictures between the cards in the fi rst and second slots. Select COPY in the playback menu. Highlight one of the following options. Option Option Description Description Copy pictures from the card in the fi rst slot to the card in SLOT1 y SLOT2 the second slot.
The Playback Menu IMAGE TRANSFER ORDER Select photos for upload to a paired smartphone or tablet. Select IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. Highlight photos and press MENU/OK to select or deselect. Re- peat until all the desired photos have been selected. Press DISP/BACK to exit to playback.
WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can then be used to: • Control the camera and take pictures remotely • Receive pictures uploaded from the camera • Browse the pictures on the camera and download selected pic- tures •...
The Playback Menu PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook Select NEW BOOK for C PLAY BACK MENU > PHOTOBOOK ASSIST. Scroll through the images and press the focus stick (focus le- ver) up to select or deselect. Press MENU/OK to exit when the book is complete.
Page 170
Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the focus stick (focus lever) left or right to scroll through the pictures. Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed;...
The Playback Menu PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. Select C PLAY BACK MENU > PRINT ORDER (DPOF). Select WITH DATE s to print the date of recording on pic- tures, WITHOUT DATE to print pictures without dates, or RESET ALL to remove all pictures from the print order before proceeding.
Select C PLAY BACK MENU > instax PRINTER PRINT PRINTER PRINT. The camera will con- instax-12345678 nect to the printer. CONNECTING FUJIFILM-CAMERA-1234 CANCEL Use the focus stick (focus lever) to PRINTER PRINT 100-0020 display the picture you want to print, then press MENU/OK. The picture will be sent to the printer and printing will start.
The Playback Menu DISP ASPECT Choose how High Defi nition (HD) devices display pictures with an aspect ratio of 4∶3 (this option is available only when an HDMI cable is connected). 16:9 4: 3 Option Option 16 16∶ ∶ 9 9 4 4 ∶...
USER SETTING Adjust basic camera settings. To access basic camera settings, press USER SETTING FORMAT MENU/OK, select the D (SET UP) tab, and DATE/TIME TIME DIFFERENCE choose USER SETTING. MY MENU SETTING SENSOR CLEANING BATTERY AGE RESET EXIT FORMAT To format a memory card: Select D USER SETTING >...
USER SETTING DATE/TIME To set the camera clock: Select D USER SETTING > DATE/TIME in the D (SET UP) tab. Press the focus stick (focus lever) left or right to highlight the year, month, day, hour, or minute and press up or down to change.
Choose a language. MY MENU SETTING Edit the items listed in the E (MY MENU) tab, a personalized cus- tom menu of frequently-used options. Highlight D USER SETTING > MY MY MENU SETTING MENU SETTING in the D (SET UP) ADD ITEMS tab and press MENU/OK.
USER SETTING SENSOR CLEANING Remove dust from the camera image sensor. Option Option Description Description Clean the sensor immediately. Sensor cleaning will be performed when the camera is WHEN SWITCHED ON turned on. Sensor cleaning will be performed when the camera turns WHEN SWITCHED OFF off...
SOUND SETTING Make changes to camera sounds. To access sound settings, press MENU/OK, SOUND SETTING select the D (SET UP) tab, and choose AF BEEP VOL. SELF-TIMER BEEP VOL. SOUND SET-UP. OPERATION VOL. SHUTTER VOLUME SHUTTER SOUND PLAYBACK VOLUME EXIT AF BEEP VOL.
SOUND SETTING SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter. Options Options i SOUND 1...
SCREEN SETTING Make changes to display settings. To access display settings, press MENU/OK, SCREEN SETTING EVF BRIGHTNESS select the D (SET UP) tab, and choose EVF COLOR EVF COLOR ADJUSTMENT SCREEN SET-UP. LCD BRIGHTNESS LCD COLOR LCD COLOR ADJUSTMENT IMAGE DISP. AUTOROTATE DISPLAYS EXIT EVF BRIGHTNESS...
SCREEN SETTING LCD BRIGHTNESS Adjust monitor brightness. Options Options −1 −2 −3 −4 −5 LCD COLOR Adjust monitor hue. Options Options −1 −2 −3 −4 −5 LCD COLOR ADJUSTMENT Adjust the color of the display in the LCD monitor. Adjust colors using the focus stick (focus lever). Press MENU/OK.
IMAGE DISP. Choose how long images are displayed after shooting. Option Option Description Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway. To zoom in on the active focus CONTINUOUS point, press the center of the rear command dial; press again to cancel zoom.
SCREEN SETTING PREVIEW EXP./WB IN MANUAL MODE Choose whether to enable exposure and/or white balance preview in manual exposure mode. Option Option Description Description PREVIEW EXP./WB Enable exposure and white balance preview. Preview white balance only. Choose this option in situations in which exposure and white balance are likely to change during PREVIEW WB shooting, as may be the case when you use a fl...
• Framing guides are not shown at default settings but can be displayed using D SCREEN SET-UP > DISP. CUSTOM SETTING (P 168). • HD framing can be customized using FUJIFILM Tether Shooting Plug-in PRO or Hyper-Utility Software HS-V5.
SCREEN SETTING AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options Options FOCUS SCALE UNITS Choose the units used for the focus distance indicator. Options Options METERS FEET...
DISP. CUSTOM SETTING Choose the items shown in the standard indicator display. In shooting mode, use the DISP/BACK button to display stan- dard indicators. Press MENU/OK and select D SCREEN SET-UP > DISP. CUSTOM SETTING in the D (SET UP) tab. Highlight items and press MENU/OK to select or deselect.
SCREEN SETTING LARGE INDICATORS MODE(EVF) Select ON to display large indicators in the electronic viewfi nd- er. The indicators displayed can be selected using D SCREEN SETTING > LARGE INDICATORS DISP. SETTING. Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(EVF) (P 11).
LARGE INDICATORS MODE(LCD) Select ON to display large indicators in the LCD monitor. The in- dicators displayed can be selected using D SCREEN SETTING > LARGE INDICATORS DISP. SETTING. Some icons are not displayed when ON is selected for LARGE INDICATORS MODE(LCD) (P 13).
SCREEN SETTING LARGE INDICATORS DISP. SETTING Choose the indicators displayed when LARGE INDICATORS DISP. SETTING Expo. DISP. ON is selected for D SCREEN SETTING > Scale LARGE INDICATORS MODE(EVF) or LARGE INDICATORS MODE(LCD). Option Option Description Description Choose the items listed at the bottom of the display. A Expo.
BUTTON/DIAL SETTING Access options for camera controls. To access control options, press MENU/OK, BUTTON/DIAL SETTING FOCUS LEVER SETTING select the D (SET UP) tab, and choose EDIT/SAVE QUICK MENU FUNCTION (Fn) SETTING BUTTON/DIAL SETTING. COMMAND DIAL SETTING SHUTTER AF SHUTTER AE SHOOT WITHOUT LENS SHOOT WITHOUT CARD EXIT...
BUTTON/DIAL SETTING EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu. Select D BUTTON/DIAL SETTING > EDIT/SAVE QUICK MENU in the D (SET UP) tab. The current quick menu will be displayed; use the focus stick (focus lever) to highlight the item you wish to change and press MENU/OK.
FUNCTION (Fn) SETTING Choose the roles played by the function buttons. Select D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING in the D (SET UP) tab. Highlight the desired control and press MENU/OK. Highlight any of the following options and press MENU/OK to assign it to the selected control.
Page 195
BUTTON/DIAL SETTING • AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). • Function button assignment options can also be accessed by hold- ing the DISP/BACK button. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
BUTTON/DIAL SETTING SHUTTER AF Choose whether the camera focuses when the shutter button is pressed halfway. Option Option Description Description • ON: Focus locks when the shutter button is pressed halfway. • AF-S OFF: No focus operation is performed when the shutter button is pressed halfway.
SHOOT WITHOUT CARD Choose whether the shutter can be released without a memory card inserted in the camera. Option Option Description Description When no memory card is inserted, the shutter can be released to test camera function and the shooting and setup menus can be displayed.
BUTTON/DIAL SETTING TOUCH SCREEN SETTING Enable or disable touch-screen controls. Option Option Description Description • ON: Touch controls enabled; the LCD monitor functions as a TOUCH SCREEN touch screen. • ON/OFF OFF: Touch controls disabled; the LCD monitor cannot be used as a touch screen.
POWER MANAGEMENT Adjust power management settings. To access power management settings, POWER MANAGEMENT press MENU/OK, select the D (SET UP) tab, AUTO POWER OFF and choose POWER MANAGEMENT. SHOOTING STAND BY MODE AUTO POWER SAVE EXIT AUTO POWER OFF Choose the length of time before the camera turns off automati- cally when no operations are performed.
POWER MANAGEMENT AUTO POWER SAVE If ON is selected, the display frame rate will drop to save power if no operations are performed for a short period, but the normal frame rate can be restored by operating camera controls. Options Options...
SAVE DATA SETTING Make changes to fi le management settings. To access fi le management settings, SAVE DATA SETTING FRAME NO. press MENU/OK, select the D (SET UP) tab, SAVE ORG IMAGE EDIT FILE NAME and choose SAVE DATA SET-UP. CARD SLOT SETTING (STILL IMAGE) SWITCH SLOT (SEQUENTIAL) MOVIE FILE DESTINATION...
SAVE DATA SETTING SAVE ORG IMAGE Choose ON to save unprocessed copies of pictures taken using RED EYE REMOVAL. Options Options EDIT FILE NAME Change the fi le name prefi x. sRGB images use a four-letter prefi x (default “DSCF”), Adobe RGB images a three-letter prefi x (“DSF”) preceded by an underscore.
SAVE DATA SETTING MOVIE FILE DESTINATION Choose the slot used to store movies. Options Options SLOT 1 SLOT 2 SELECT FOLDER Create folders and choose the folder used to store subsequent pictures. Option Option Description Description To choose the folder in which subsequent pictures will be SELECT FOLDER stored, press the focus stick (focus lever) up or down to highlight an existing folder and press MENU/OK.
Description To pair the camera with a smartphone or tablet, select this op- PAIRING tion, then launch FUJIFILM Camera Remote on the smart device REGISTRATION and tap PAIRING REGISTRATION. Choose a connection from a list of devices with which the SELECT PAIRING camera has been paired using PAIRING REGISTRATION.
• Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. • When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TRANSFER or images are currently selected for upload using the...
The camera functions normally when not con- nected. Connecting the camera to a computer via USB automatically enables tethered shooting mode. You can also use FUJIFILM USB TETHER X Acquire to save and load camera settings, allowing you to SHOOTING AUTO reconfi...
Page 208
Tethered shooting is available with software such as Hyper-Utility Software HS-V5 (available separately) or FUJIFILM X Acquire (available for free download from the Fujifi lm website) or when the FUJIFILM Tether Shooting Plug-in PRO or Tether Shooting Plug-in (both available...
CONNECTION SETTING GENERAL SETTINGS Adjust settings for connection to wireless networks. Option Option Description Description Choose a name (NAME) to identify the camera on the wireless NAME network (the camera is assigned a unique name by default). Choose whether to resize images for upload to smartphones. Resizing applies only to the copy uploaded to the smartphone;...
Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to the Q menu or a cus- tom “my” menu or assigned to an Fn (function) button for direct access: Shortcut Option Shortcut Option Description Description The Q menu is displayed by pressing the Q button.
The Q (Quick Menu) Button Press Q for quick access to selected options. The Quick Menu Display At default settings, the quick menu contains the following items: SELECT CUSTOM SETTING BASE SELECT CUSTOM SETTING HIGHLIGHT TONE SHADOW TONE DYNAMIC RANGE COLOR WHITE BALANCE SHARPNESS...
Viewing and Changing Settings Press Q to display the quick menu during shooting. SELECT CUSTOM SETTING Use the focus stick (focus lever) to BASE highlight items and rotate the rear command dial to change. • Changes are not saved to the cur- rent settings bank.
The Q (Quick Menu) Button Editing the Quick Menu To choose the items displayed in the quick menu: Press and hold the Q button during shooting. The current quick menu will be dis- played; use the focus stick (focus le- ver) to highlight the item you wish to change and press MENU/OK.
The Fn (Function) Buttons Assign a role to the function buttons for quick access to the selected feature. The functions assigned to T-Fn1 through T-Fn4 can be accessed by fl ick- ing the monitor. The default assignments are: Fn1 button Fn1 button Fn2 button Fn2 button...
Assigning Roles to the Function Buttons To assign roles to the buttons: Press and hold the DISP/BACK button until a control selection menu is dis- played. Highlight a control and press MENU/OK. Highlight the desired role and press MENU/OK to assign it to the selected control.
Page 219
The Fn (Function) Buttons • AE LOCK ONLY, AF LOCK ONLY, AE/AF LOCK, and AF-ON cannot be assigned to the touch function buttons (T-Fn1 through T-Fn4). • Button assignments can also be selected using D BUTTON/DIAL SETTING > FUNCTION (Fn) SETTING. AF-ON If AF-ON is selected, you can press the control instead of keeping the shutter button pressed halfway.
MY MENU Access a personalized menu of frequently-used options. To display “my menu”, press MENU/OK in the MY MENU SELF-TIMER shooting display and select the E (MY INTERVAL TIMER SHOOTING FILM SIMULATION MENU) tab. GRAIN EFFECT SHUTTER TYPE IS MODE FACE/EYE DETECTION SETTING EXIT The E tab is only available if options have been assigned to...
Page 221
MY MENU Choose a position for the item and SELECT ITEM LOCATION 1 IMAGE SIZE press MENU/OK. The item will be added 2 IMAGE QUALITY to “my menu”. MOVE SAVE Press MENU/OK to return to the edit display. Repeat Steps 3 and 4 until all the desired items have been added.
Lenses The camera can be used with lenses for the FUJIFILM G-mount. Lens Parts Lens hood Aperture ring Mounting marks Lens signal contacts Focus ring Front lens cap Aperture ring lock release Rear lens cap Mounting marks (focal length) A GF63mmF2.8 R WR lens is used here for illustrative purposes.
Lenses Lens Care • Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifi lm lens-cleaning paper to which a small amount of lens-cleaning fl uid has been applied. •...
Lenses Aperture ring Rotate the lens aperture ring to choose the aperture (f-number). Aperture ring Aperture ring lock release Setting Setting Description Description Set aperture to the value chosen with the camera command C ( C ( dial. Set aperture to the value chosen automatically by the A ( A ( camera.
External Flash Units Flash units can be mounted on the hot shoe or connected via the sync terminal. Use optional external fl ash units for fl ash photography. Some units support high-speed sync (FP) and can be used at shutter speeds faster than the fl ash sync speed, while others can func- tion as master fl ash units controlling remote units via optical wireless fl ash control.
Flash Settings To adjust settings for a fl ash unit mounted on the hot shoe or connected via the sync terminal: Connect the unit to the camera. In shooting mode, select FLASH FLASH SETTING FUNCTION SETTING in the F (FLASH FLASH FUNCTION SETTING RED EYE REMOVAL SETTING) menu tab.
External Flash Units SYNC TERMINAL The following options are available when no compatible fl ash unit is connected or if a unit is connected via the sync terminal or uses only the X-contact on the hot shoe. MODE SYNC TERMINAL ADJUST Setting Setting...
SHOE MOUNT FLASH The following options are available when an optional shoe-mounted fl ash unit is attached and turned on. MODE SHOE MOUNT FLASH ADJUST Setting Setting Description Description The fl ash control mode selected with the fl ash unit. This can in some cases be adjusted from the camera;...
Page 231
External Flash Units Setting Setting Description Description The options available vary with fl ash control mode. • TTL: Adjust fl ash compensation (the full value may not be applied if the limits of the fl ash control system are exceed- ed).
Page 232
Setting Setting Description Description The angle of illumination (fl ash coverage) for units that sup- port fl ash zoom. Some units allow the adjustment to be Zoom made from the camera. If AUTO is selected, zoom will auto- matically be adjusted to match coverage to lens focal length. If the unit supports this feature, choose from: •...
External Flash Units MASTER(OPTICAL) The options will be displayed if the unit is currently functioning as master fl ash for Fujifi lm optical wireless remote fl ash control. MODE MASTER(OPTICAL) ADJUST The master and remote units can be placed in up to three groups (A, B, and C) and fl ash mode and fl ash level adjusted separately for each group.
Page 234
Setting Setting Description Description Choose fl ash control modes for groups A, B, and C. TTL% is available for groups A and B only. Flash control mode • TTL: The units in the group fi re in TTL mode. Flash com- (group A) pensation can be adjusted separately for each group.
Page 235
External Flash Units Setting Setting Description Description Choose a fl ash mode for TTL fl ash control. The options available vary with the shooting mode (P, S, A, or M) se- lected. • E (FLASH AUTO): The fl ash fi res only as required; fl ash level is adjusted according to subject brightness.
Page 236
External Flash Units Setting Setting Description Description If the unit supports this feature, choose from: • J (FLASH POWER PRIORITY): Gain range by slightly re- ducing coverage. Lighting • K (STANDARD): Match coverage to picture angle. • L (EVEN COVERAGE PRIORITY): Slightly increase coverage for more even lighting.
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. Turn the camera off . Connect the cable as shown below. Insert into HDMI connector Insert into HDMI Micro...
HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. Playback To start playback, press the camera a button. The camera mon- itor turns off and pictures and movies are output to the HDMI device.
Connect to the camera via Bluetooth or wireless LAN. To establish a wireless connection to the camera, you will need to in- stall the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet. FUJIFILM Camera Remote...
Page 241
Wireless Connections SmartPhones and Tablets: Bluetooth® Pairing Use D CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing off ers a simple method for downloading photos from the camera. • Photos are downloaded via a wireless connection. •...
• For more information, visit the following website: http://app.fujifilm-dsc.com/en/#tether • For more information on FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5, see “Software from Fujifi lm” (P 234).
Connecting to Computers via USB Connect the camera to a computer to download pictures or take pictures remotely. Before downloading pictures or taking pictures remotely, connect the camera to a computer and check that it functions normally. Turn the computer on. Adjust settings according to whether you will be using the camera for tethered shooting (P 226), copying pictures to a computer (P 227), save RAW pictures in other formats...
Page 244
STUDIO. The power of the camera’s image processing en- gine is used for rapid processing. • Saving and loading camera settings: Use FUJIFILM X Acquire to save or load camera settings. Save your preferred settings to a fi le in a single operation and copy them to multiple...
Page 245
Connecting to Computers via USB • Turn the camera off before disconnecting the USB cable. • When connecting USB cables, be sure the connectors are fully in- serted in the correct orientation. Connect the camera directly to the computer; do not use a USB hub or keyboard. •...
• For more information, visit the following website: http://app.fujifilm-dsc.com/en/#tether • For more information on FUJIFILM X Acquire, the FUJIFILM Tether Shooting Plug-in, FUJIFILM Tether Shooting Plug-in PRO, and Hyper-Utility Software HS-V5, see “Software from Fujifi lm” (P 234).
Connecting to Computers via USB Copying Pictures to a Computer • Before copying pictures to a computer, CONNECTION SETTING Bluetooth SETTINGS USB CARD READER select USB CARD READER for D CON- NETWORK SETTING USB TETHER SHOOTING AUTO PRINTER CONNECTION SETTING NECTION SETTING >...
FUJIFILM X RAW STUDIO can be used RESET WIRELESS SETTING to save copies of RAW images in other formats. For more information on FUJIFILM X RAW STUDIO, see “Software from Fujifi lm” (P 234). Saving and Loading Camera Settings (FUJIFILM X Acquire) •...
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select D CONNECTION SETTING > instax PRINTER CONNECTION SETTING and enter the instax SHARE printer name (SSID) and pass- word. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer;...
Select C PLAY BACK MENU > instax PRINTER PRINT PRINTER PRINT. The camera will con- instax-12345678 nect to the printer. CONNECTING FUJIFILM-CAMERA-1234 CANCEL Use the focus stick (focus lever) to PRINTER PRINT 100-0020 display the picture you want to print, then press MENU/OK.
It can also be used to charge the battery without removing it from the camera. FUJINON lenses FUJINON lenses GF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM G-mount. Mount adapters Mount adapters H MOUNT ADAPTER G: This mount adapter allows the camera to be used with SUPER EBC FUJINON accessories for the GX645AF, giving you the use of one addi-...
Page 253
Accessories from Fujifi lm Shoe-mounted fl ash units Shoe-mounted fl ash units EF-X500: This clip-on fl ash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and supports FP (high-speed sync), allowing it to be used at shutter speeds that exceed the fl...
Software from Fujifi lm The camera can be used with the following Fujifi lm software. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 220). http://app.fujifilm-dsc.com/en/camera_remote/ MyFinePix Studio Manage, view, print, and edit the many images downloaded from your digital camera (P 227).
Software from Fujifi lm FUJIFILM X RAW STUDIO When the camera is connected to a computer via USB, FUJIFILM X RAW STUDIO can use the camera’s unique image processing engine to rapidly convert RAW fi les to create high-quality images in other formats.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS • Read Instructions: All the safety and operating instructions Power-Cord Protection: Power-supply cords should be routed Read Instructions should be read before the appliance is operated. so that they are not likely to be walked on or pinched by •...
Page 257
For Your Safety Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualifi ed service person- light or power circuits, or where it can fall into such power nel under the following conditions: •...
Page 258
WARNING WARNING WARNING WARNING Using a fl ash too close to a person’s eyes may cause visual Using a fl ash too close to a person’s eyes may cause visual Never attempt to change or take apart the camera (never Never attempt to change or take apart the camera (never impairment.
Page 259
For Your Safety CAUTION CAUTION CAUTION CAUTION Do not cover or wrap the camera or the AC power adapter Do not cover or wrap the camera or the AC power adapter When a memory card is removed, the card could come When a memory card is removed, the card could come in a cloth or blanket.
Page 260
Failure to observe this Digital Split Image is a trademark or registered trademark of precaution could damage the camera image sensor. FUJIFILM Corporation. Digital Micro Prism is a trademark or • Strong sunlight focused through the viewfi nder may dam- registered trademark of FUJIFILM Corporation.
Page 261
For Your Safety NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U.
Page 262
fi ndings Liechtenstein: If you wish to discard this product, including have not been confi rmed by additional research. GFX 50R the batteries or accumulators, please contact your local au- has been tested and found to comply with IC radiation ex- thorities and ask for the correct way of disposal.
Page 263
RE Directive 2014/53/EU er attention to security than applies in the case of wired networks. Hereby, FUJIFILM Corporation declares that the radio Do not connect to unknown networks or networks to equipment type FF180004 is in compliance with Directive which you do not have access rights, even if they are 2014/53/EU.
Page 264
For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING WARNING • Make sure that you use the lens correctly. Read these safety Do not immerse in or expose to water. Failure to ob- Do not immerse in or expose to water.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth.
Cleaning the Image Sensor Dust that cannot be removed using D USER SETTING > SENSOR CLEANING can be removed manually as de- scribed below. Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. Use a blower (not a brush) to remove dust from the sensor.
Firmware Updates Updates to product fi rmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/software Checking the Firmware Version The camera will only display the fi rmware version if a memory card is inserted.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t fi nd the solution here, con- tact your local Fujifi lm distributor. Power and Battery Problem Problem Solution Solution • The battery is exhausted: Charge the battery or insert a ful- ly-charged spare battery (P 29).
Page 269
Troubleshooting Problem Problem Solution Solution • Insert the battery (P 32). • Reinsert the battery in the correct orientation (P 32). • Make sure that the charger is correctly plugged in Charging does not start. (P 29). • Ensure that the plug adapter is correctly connected to the charger (P 29).
Page 270
Shooting Problem Problem Solution Solution • The memory card is full: Insert a new memory card or delete pictures (P 34, 138). • The memory card is not formatted: Format the memory card in the camera (P 156). • There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth.
Page 271
Troubleshooting Problem Problem Solution Solution • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 104). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occu- No face is detected.
Page 272
Problem Problem Solution Solution • The subject is not in range of the fl ash: Position the subject in range of the fl ash. The fl ash does not fully • The fl ash window is obstructed: Hold the camera correctly. light the subject.
Page 273
Troubleshooting Playback Problem Problem Solution Solution The pictures were taken with a diff erent make or model of Pictures are grainy. camera. Playback zoom is The pictures were created using RESIZE or with a diff erent unavailable. make or model of camera. •...
Page 274
Connections Problem Problem Solution Solution The camera is connected to a TV: Pictures will be displayed on The monitor is blank. the TV instead of in the camera monitor (P 218). The display mode selected with the VIEW MODE button is EVF ONLY + E: Put your eye to the viewfi...
Troubleshooting Wireless Transfer For additional information on troubleshooting wireless connec- tions, visit: http://digital-cameras.support.fujifilm.com/app?pid=x Problem Problem Solution Solution Cannot connect to smartphone. • The smartphone is too far away: Move the devices closer The camera is slow (P 220). to connect or upload •...
Page 276
Troubleshooting Miscellaneous Problem Problem Solution Solution • Temporary camera malfunction: Remove and reinsert the battery (P 32). • The battery is exhausted: Charge the battery or insert a The camera is unresponsive. fully-charged spare battery (P 29). • The camera is connected to a wireless LAN: End the con- nection.
Warning Messages and Displays The following warnings appear in the display. Warning Warning Description Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a ful- j (blinks red) ly-charged spare battery.
Page 278
Warning Warning Description Description • The memory card is not formatted for use in the camera: For- mat the card. • The memory card contacts require cleaning or the memory card is damaged: Clean the contacts with a soft, dry cloth. If the CARD ERROR message is repeated, format the card.
Page 279
Warning Messages and Displays Warning Warning Description Description • The fi le is corrupt or was not created with the camera: The fi le cannot be viewed. • The memory card contacts require cleaning: Clean the con- READ ERROR tacts with a soft, dry cloth. If the message is repeated, format the card.
Memory Card Capacity The following table shows the recording time or number of pictures available at diff erent image sizes. All fi gures are approximate; fi le size varies with the scene recorded, pro- ducing wide variations in the number of fi les that can be stored.
Specifi cations System Model FUJIFILM GFX 50R Product Number FF180004 Eff ective pixels Approx. 51.4 million Image sensor 43.8 mm × 32.9 mm Bayer array with primary color fi lter Storage media Fujifi lm-recommended SD/SDHC/SDXC memory cards Memory card slots Two SD memory card slots (UHS-II compliant) File system Compliant with Design Rule for Camera File System (DCF2.0),...
Page 282
System • Shutter speed MECHANICAL SHUTTER, E-FRONT CURTAIN SHUTTER ⁃ Mode P: 4 s to ¼ s ⁃ Other modes: 60 min. to ¼ s ⁃ Time: 60 min. to ¼ s ⁃ Bulb: Max. 60 min. • ELECTRONIC SHUTTER, MECHANICAL + ELECTRONIC, E-FRONT + ELECTRONIC ⁃...
Page 283
Specifi cations System Viewfi nder 0.5-in., 3690k-dot OLED viewfi nder; magnifi cation 0.77× with 50 mm lens (35 mm format equivalent) at infi nity and diopter −1 set to −1.0 m ; diagonal angle of view approximately 38° (horizontal angle of view approximately 30°) •...
Page 284
Power supply/other • Power supply NP-T125 rechargeable battery (supplied with camera) • AC-15V AC adapter (available separately) • Battery life Battery type: NP-T125 • Lens: GF63mmF2.8 R WR • Flash: Disabled • Shooting mode: Mode P Number of shots Number of shots AUTO POWER SAVE AUTO POWER SAVE Approx.
Page 285
Specifi cations Wireless transmitter Wireless LAN Standards IEEE 802.11b/g/n (standard wireless protocol) Operating frequency 2,412 MHz–2,462 MHz (11 channels) (center frequency) Maximum radio- 3.53 dBm frequency power (EIRP) Access protocols Infrastructure Bluetooth® Standards Bluetooth version 4.0 (Bluetooth Low Energy) Operating frequency 2,402 MHz–2,480 MHz (center frequency) Maximum radio-...