Sony BRAVIA 4-141-451-E1(2) Operating Instructions Manual page 23

Set-up
Auto Start-up
Starts the initial set-up to select the language, country/region and location, and tune
in all available digital and analogue channels. Usually, you do not need to do this
operation because the language and country/region will have been selected and
channels already tuned when the TV was first installed (page 7). However, this
option allows you to repeat the process (e.g., to retune the TV after moving house).
Language
Selects the language in which the menus are displayed.
Auto Tuning
Tunes in all the available analogue channels.
Usually you do not need to do this operation because the channels are already tuned
(Only in analogue
when the TV was first installed (page 7). However, this option allows you to repeat
mode)
the process (e.g., to retune the TV after moving house, or to search for new channels
that have been launched by broadcasters).
Programme Sorting
Changes the order in which the analogue channels are stored on the TV.
(Only in analogue
1
mode)
2
AV Preset
Assigns a name to any equipment connected to the side and rear sockets. The name
will be displayed briefly on the screen when the equipment is selected.
1
2
HDMI Set-up
Allows the TV to communicate with equipment that is compatible with the control
for HDMI function, and connected to the HDMI sockets of the TV. Note that
communication settings must also be made on the connected equipment.
"Control for HDMI": Sets whether or not to link the operations of the TV and the
connected equipment that is compatible with control for HDMI.
"Auto Devices Off": When this is set to "On", the connected equipment that is
compatible with control for HDMI turns off when you switch the TV to standby
mode using the remote.
"Auto TV On": When this is set to "On", the TV turns on when you turn on the
connected equipment that is compatible with control for HDMI.
"Device List Update": Creates or updates the "HDMI Device List". Up to 11
compatible equipment items can be connected, and up to 5 equipment items can be
connected to a single socket. Be sure to update the "HDMI Device List" when you
change the connections or settings.
"HDMI Device List": Displays a list of connected equipment that is compatible
with control for HDMI.
F f
/ to select the channel you want to move to a new position,
Press
g
then press .
F f
Press / to select the new position for your channel, then press
F f
Press / to select the desired input source, then press
F f
Press / to select the desired option below, then press
• AV1 (or AV2/AV3/HDMI1/HDMI2/HDMI3/Component/PC), VIDEO, DVD,
CABLE, GAME, CAM, SAT
connected equipment.
• "Edit": Creates your own label.
1 Press F f
/ to select the desired letter or number ("_" for a blank
space), then press
If you input a wrong character
Press / to select the wrong character. Then, press
G g
character.
2 Repeat the procedure in step 1 until the name is completed, then
press .
: Uses one of the preset labels to assign a name to
g
.
.
.
.
/ to select the correct
F f
Continued
23
GB