Sony BRAVIA 4-114-464-11(1) Operating Instructions Manual page 45

Condition
"Black box" on screen
Black bands appear at the
edges of the screen
Certain programs on DVD or
other digital sources display a
loss of detail, especially during
fast-motion or dark scenes
Remote control does not
operate
Some digital cable channels
are not being displayed
Lost password
How to reset the TV to factory
settings
TV screen feels warm
Explanation/Solution
• You have selected a text option and no text is available (see page 38). To turn off
this feature, set the CC Display option to Off. If you were trying to select
closed captioning, select CC1 instead of Text1-4.
• Some wide screen programs are filmed in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your TV will show these
programs with black bands at the top and bottom of the screen. For more
details, check the documentation that came with your DVD (or contact your
program provider).
• Programs in 4:3 aspect ratio will have bands on left and right sides of the
screen.
• Programs broadcast in HD formats (720p and 1080i) with 4:3 content will
commonly have black bands on the left and right sides of the screen which are
added by the broadcaster (see image on left).
• Auto Wide will not expand the picture when the black bands on the sides of
the screen are added by the broadcaster. You can manually change the Wide
Mode to Wide Zoom, H Stretch or Zoom to fill the screen, which will
remain in affect until you change the channel or input or manually change the
Wide Mode again.
• This is due to the digital compression of the source content used by certain
digital broadcasts and DVDs which may cause your TV's screen to display less
detail than usual, or cause artifacts (small blocks or dots, pixelations) to appear
on your screen. These signal compressions are more visible and are dependent
on the clarity and resolution of the TV.
• To determine if the problem is with the remote control or not, press a button on
the TV.
• Check the polarity of the batteries or replace the batteries.
• Point the remote control at the remote control sensor located at the front of the TV.
• Keep the remote control sensor area clear from obstacles.
• Fluorescent lamps can interfere with your remote control operation; try turning
off the fluorescent lamps.
• Certain cable companies have limitations on the broadcast of digital cable
channels. Check with your cable company for more information.
• The digital cable channel may be set to Hidden in the Show/Hide Channels
setting (see page 37).
• Select the Password settings on the Parental Lock settings, then enter the
following master password: 4357. This password clears your previous password
and allows you to enter a new password (see page 38).
• Turn on the TV. While holding down V on the remote control, press POWER
on the TV. (The TV will turn itself off, then back on again.) Release V.
WARNING: The reset will clear all of your customized settings including the
Parental Lock setting.
• Due to the thin profile of this television, the heat generated by the LCD panel
backlight and supporting electronics will be more noticeable. This is normal
operation and not a cause for concern.
45