Physio Control Lifepak CR2 Getting Started Manual
Defibrillator with lifelinkcentral aed program manager
Hide thumbs
Also See for Lifepak CR2:
- Operating instructions manual (134 pages) ,
- Service manual (104 pages) ,
- Operating instructions (5 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Physio Control Lifepak CR2
Summary of Contents for Physio Control Lifepak CR2
- Page 1 LIFEPAK CR2 Defibrillator ® AED Program Manager with LIFELINKcentral ™ Getting Started Guide...
- Page 2 LIFELINKcentral AED Program Manager ™ a heart stops beating, lifesaving treatment is just minutes away. Please ensure the LIFEPAK CR2 Defibrillator is ‘Connected and Ready’ for use in an emergency by following these simple instructions.
- Page 3 Defibrillator Management The Connected AED Physio-Control offers web-based services that If your LIFEPAK CR2 defibrillator has wireless can monitor your LIFEPAK CR2 defibrillator (AED) capability, it can connect to the internet and report and ensure it is ready for use. These services...
- Page 4 Manager or LIFENET System using a Wi-Fi , cellular, or ® USB connection to the internet. LIFEPAK CR2 Defibrillator Connectivity Note: The micro-USB port is to be used by authorized users only. The micro-USB port does not provide power and should...
- Page 5 1 year of this date. For detailed shipping box, please call information about battery service life, Physio-Control Customer Support or see the LIFEPAK CR2 Defibrillator your local authorized distributor as Operating Instructions. soon as possible. See the contact list included in the box for region-specific phone numbers.
- Page 6 Determine if the AED has Wi-Fi or cellular capability. ® All LIFEPAK CR2 defibrillators have USB capability. To determine if the AED also has wireless (Wi-Fi or Cellular) capability, check the serial number label located in the battery compartment on the back of the AED.
- Page 7 Record the serial number. Install battery and wait for self-test to complete. Find the AED’s serial number as shown below and record it here. Insert the battery into the battery compartment located on the back of SERIAL NUMBER: the AED. The device will automatically begin a self-test.
- Page 8 Verify that the Readiness Check the speaker. indicator is flashing. Open the lid and confirm that the voice prompts are audible. Do not respond The green Readiness indicator will to the voice prompts at this time. Close flash every 6 seconds through a the lid to turn off the device.
- Page 9 Refer to Wireless Setup Guide, if applicable.* If your AED has wireless capability, please refer to the Wireless Setup Guide included in the box to connect the AED to your LIFELINKcentral AED Program Manager or LIFENET System account. Refer to step 3 in this guide to determine if your AED has wireless capability.
- Page 10 Notify potential users of the location. • Avoid exposure to moisture or dust. • Do not store the AED in the presence of Your LIFEPAK CR2 Defibrillator flammable gases or in direct contact with is now ready for use flammable material. •...
-
Page 11: Maintenance
Training Maintenance The LIFEPAK CR2 defibrillator conducts daily, weekly, • Read the Operating Instructions. and monthly self-tests to ensure it is ready for use. If your The Operating Instructions provide complete directions for use, indications, and potential adverse device needs attention and has a wireless connection to events. -
Page 12: How To Get Help
How to get help. If you need assistance, contact Physio-Control Customer Support. See the contact list included with this guide for region-specific phone numbers. When you call, be prepared to provide your device serial number (recorded in step 4 of this guide). Physio-Control is now part of Stryker.
Need help?
Do you have a question about the Lifepak CR2 and is the answer not in the manual?
Questions and answers