Radio Operation
FUNCTION SWITCH
RIF/FM MODE SWITCH (ST./MONO)
Tape Operation
• TAPE PAUSE (
• TAPE STOP/EJECT ( xZ )
• FAST FORWARD ( m )
• REWIND ( M )
• TAPE PLAY ( b )
• TAPE RECORD ( z )
8
Listening to the radio
TUNING dial
1 1
2 2
To turn off the radio
Set FUNCTION SWITCH to TAPE
your unit.
Setting STEREO/ MONO
1 1
2 2
Adjust the antenna to get more clear reception.
• AM antenna
• FM antenna
Basic Playback
1 1
2 2
3 3
4 4
To Pause Play
Press TAPE PAUSE ( X ) button to pause. Press the
button again to resume play.
To Stop Play
X )
Press TAPE STOP/EJECT ( xZ ) button to stop play.
(Your cassette deck will automatically stop at the end of
the tape.)
To Play Rewind or Fast Forward
After pressing and holding FAST FORWARD/REWIND
( m/M ) button during playback, press TAPE PLAY
( b ) at the point you want.
Set FUNCTION SWITCH to select AM or FM.
Set a station by turning TUNING dial.
Set RIF/ FM MODE SWITCH to ST. to listening
to an FM stereobroadcast.
Set RIF/ FM MODE SWITCH to MONO when
listening to an FM stereo broadcast.
Selecting this function will substantially reduce the
noise, however the stereo effect will be lost.
Notes
This antenna is built within the unit and rotate the unit
for better reception.
Pull the telescopic antenna out and adjust the angle
and direction for better reception.
Set FUNCTION SWITCH to TAPE.
Open the cassette door by pressing TAPE
STOP/EJECT ( xZ ) button.
Insert a cassette and push close the TAPE
door.
Press TAPE PLAY ( b ) to playback.
or CD to turn off
(OFF)