Connecting A Vcr Or Similar Device; Connecting To The Line 1 Jack - Sony 4-151-079-11(1) Operating Instructions Manual

Sony dvd recorder operating instructions
Table of Contents

Advertisement

Connecting a VCR or Similar Device

After disconnecting the recorder's AC power cord (mains lead) from the mains, connect a
VCR or similar recording device to the LINE IN jacks of this recorder.
To watch the connected VCR or a similar device's picture through the recorder while the
recorder is in standby mode, set "Standby Mode" to "Mode 2" in the "System 1" setup
(page 72). If not, the picture will not appear.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
(page 63).
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see "Recording from Connected Equipment" on page 39.

Connecting to the LINE 1 jack

Connect a VCR or similar recording device to the LINE 1 jack of this recorder.
To connect the EURO AV adapter, see page 17.
Audio/video cable
(not supplied)
to i LINE 1
: Signal flow
VCR, etc.
EURO AV adapter (supplied)
The red plug at right (page 17)
DVD recorder
23
,continued

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rdr-hdc100Rdr-hdc300Rdr-hdc500

Table of Contents