Samsung WF220ANW/XAA Training Manual page 80

5.Reference Information
5-6. Q & A
Q. When I went back to my washer, it was
turned off. What happened?
Q. The washer door gets locked after a power
failure. How can I open it?
Q. The washer door does not unlock when
there is water in the tub. How can I open
it?
A. Power button may have been accidentally bumped or pushed.
Reset the cycle and start the washer. Make sure the unit is
plugged into a live electrical outlet. Check house fuse or circuit
breaker.
A. If the power fails while the door is locked, the door will remain
locked until the power comes back on. If the power comes back
on while the door is still locked, the cycle will resume where it left
off. If the door is unlocked, "PF" will display and the washer will
pause. Press Power Off and restart the cycle.
A. The water must be drained from the tub for the door to be opened.
Set the rotary dial to Spin Only and press the Start/Pause dial.
The door will open 2-3 seconds after the Spin or Drain cycle is
completed.