Download  Print this page

Settings For The Sound (audio Setup) - Sony DVP-NS3100ES Operating Instructions Manual

Cd/dvd player.
Hide thumbs

Advertisement

Table of Contents
Settings for the Sound
(AUDIO SETUP)
"AUDIO SETUP" allows you to set the sound
according to the playback and connection
conditions.
Select "AUDIO SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 68).
The default settings are underlined.
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO FILTER:
DOWNMIX:
DIGITAL OUT:
AUDIO(HDMI):
◆ AUDIO ATT (attenuation)
If the playback sound is distorted, set this
item to "ON." The player reduces the audio
output level.
This function affects the output of the
following jacks:
– AUDIO OUT L/R 1/2 jacks
– 5.1CH OUTPUT jacks
OFF
Normally, select this position.
ON
Select this when the playback sound
from the speakers is distorted.
◆ AUDIO DRC (Dynamic Range Control)
(DVD VIDEO/DVD-RW only)
Allows smaller sound to be heard at low
volume when playing a DVD that conforms
to "AUDIO DRC." This feature applies only
to Dolby Digital-encoded soundtracks. This
affects the output from the following jacks:
– 5.1CH OUTPUT jacks
STANDARD Normally select this position.
WIDE
Gives you the feeling of being
RANGE
at a live performance.
• When "DOLBY DIGITAL" is set to "D-PCM,"
• When "AUDIO DRC" is set to "WIDE RANGE,"
◆ AUDIO FILTER (except Super Audio CD)
Selects a digital filter to reduce noise above
22.05 kHz (Sampling frequency (Fs) of the
audio source is 44.1 kHz), 24 kHz (Fs is 48
OFF
STANDARD
kHz), or 48 kHz (Fs is above 96 kHz).
SHARP
DOLBY SURROUND
SHARP
AUTO
SLOW
There may be little effect by changing the digital
filter depending on the disc or playback
environment.
◆ DOWNMIX (DVD VIDEO/DVD-RW only)
Switches the method for mixing down to 2
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see "Displaying the
disc's audio information" (page 49). This
function affects the output of the following
jacks:
– AUDIO OUT L/R 1/2 jacks
– DIGITAL OUT (COAXIAL or OPTICAL)/
DOLBY
SUR-
ROUND
NORMAL
Notes
you cannot set "AUDIO DRC" to "WIDE
RANGE." Even if you have already set "AUDIO
DRC" to "WIDE RANGE," when you set
"DOLBY DIGITAL" to "D-PCM," "AUDIO
DRC" is changed to "STANDARD" forcibly.
sound may not be output from the component
connected to the AUDIO OUT L/R 1/2 or HDMI
jack.
Provides a wide frequency
range and spatial feeling.
Provides smooth and warm
sound.
Note
HDMI OUT jack when "DOLBY
DIGITAL" or "DTS" is set to "D-PCM"
(page 74).
Normally select this position.
Multi-channel audio signals are
output to two channels for
enjoying surround sounds.
Multi-channel audio signals are
downmixed to two channels for
use with your stereo.
73
c continued

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: