Notes
• “MULTI-DISC RESUME” in “CUSTOM
SETUP” must be set to “ON” (default) for this
function to work (page 81).
• The point where you stopped playing is cleared
when:
– you change the play mode.
– you change the settings on the Setup Display.
• For DVD-RWs in VR mode, Super Audio CDs,
CDs, and DATA CDs, the player remembers the
resume playback point for the current disc.
The resume point is cleared when:
1–5
– you press DISC SKIP or DISC
.
– you opened the disc tray.
– you disconnect the power cord.
– the player enters standby mode (DATA CD only).
• Resume Play does not work during Shuffle Play
and Program Play.
• This function may not work with some discs.
• If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you playback a
recorded disc such as DVD-RW, the player may
playback other recorded discs from the same
resume point. To play from the beginning, press
x twice and then press H.
Page 37