Specifications - Mitsubishi Electric MELSEC-A series User Manual

Hide thumbs

Advertisement

Table of Contents

1. SPECIFICATIONS

1.1 SPECIFICATIONS
Item
Ambient
operating
temperature
Ambient storage
temperature
Ambient
operating
humidity
Ambient storage
humidity
Conforming to
Vibration
JIS B 3502,
resistance
IEC 61131-2
Shock resistance
Operating
ambience
Operating
elevation *3
Installation
location
Over voltage
category *1
Pollution level *2
Equipment
category
*1 : This indicates the section of the power supply to which the equipment is
assumed to be connected between the public electrical power distribution
network and the machinery within premises. Category II applies to
equipment for which electrical power is supplied from fixed facilities. The
surge voltage withstand level for up to the rated voltage of 300 V is 2500 V.
*2 : This index indicates the degree to which conductive material is generated in
terms of the environment in which the equipment is used. Pollution level 2 is
when only non-conductive pollution occurs. A temporary conductivity caused
by condensing must be expected occasionally.
*3 : Do not use or store the PC in the environment when the pressure is higher
than the atmospheric pressure at sea level. Otherwise, malfunction may
result. To use the PC in high-pressure environment, contact your nearest
Mitsubishi representative.
Table 1.1 General specification
10 to 90 % RH, No-condensing
10 to 90 % RH, No-condensing
Frequency
Under
10 to 57Hz
intermittent
vibration
57 to 150Hz
Under
10 to 57Hz
continuous
vibration
57 to 150Hz
Conforming to JIS B 3502, IEC 61131-2
2
(147m/s
, 3 times in each of 3 directions X Y Z)
No corrosive gases
2000m (6562ft.) max.
1
Specifications
0 to 55 °C
−20 to 75 °C
Acceleration Amplitude
⎯⎯
2
9.8m/s
⎯⎯
2
4.9m/s
Control panel
II max.
2 max.
Class I
No. of
sweeps
0.075mm
10 times
(0.003in.)
each in
⎯⎯
X, Y, Z
00.35mm
directions
(0.001in.)
(for 80min.)
⎯⎯

Advertisement

Table of Contents
loading

  Related Manuals for Mitsubishi Electric MELSEC-A series

This manual is also suitable for:

A1sjhcpu

Table of Contents