Table of Contents
Advertisement
LEVEL (FRONT)
Varies the level of the front speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
R (0 dB)
Set this between –6 dB and 0
dB in 0.5 dB increments.
CENTER
Set this between –12 dB and
(0 dB)
0 dB in 0.5 dB increments.
SUBWOOFER
For DVDs:
(DVD: –5 dB/
(When "SIZE" are set to the
SUPER
default settings):
AUDIO CD:
Set this between –10 dB
0 dB)
and +10 dB in 0.5 dB
increments.
(When "SIZE" are not set to
the default settings):
Set this between –15 dB
and +5 dB in 0.5 dB
increments.
For Super Audio CDs:
Set this between –10 dB and
+10 dB in 0.5 dB increments.
LEVEL (REAR)
Varies the level of the rear speakers. Be sure
to set "TEST TONE" to "ON" for easy
adjustment.
The default adjustments are in parentheses.
L (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
R (0 dB)
Set this between –12 dB and
0 dB in 0.5 dB increments.
To adjust the volume of all the speakers at
one time
Use the amplifier's (receiver's) volume
control.
TEST TONE
The speakers will emit a test tone. Use this
when you use the 5.1CH OUTPUT jacks and
adjust "LEVEL (FRONT)" and "LEVEL
(REAR)."
OFF
The test tone is not emitted
from the speakers.
ON
The test tone is emitted from
each speaker in sequence while
adjusting balance or level.
Adjusting the speaker volume
and level
1
Select "SPEAKER SETUP" in the Setup
Display.
2
Select "TEST TONE" and set to "ON."
You will hear the test tone from each
speaker in sequence.
3
From your listening position, select
"LEVEL (FRONT)" or "LEVEL (REAR)"
and adjust the value using X/x.
The test tone is emitted from both left and
right speakers simultaneously.
4
Select "TEST TONE" and set to "OFF"
to turn off the test tone.
Note
The test tone signals are not output from the digital
jack.
79
Hide quick links:
Advertisement
Table of Contents
