Setting The Pace For A Slide Show - Sony DVP-NC66K Operating Instructions Manual

Setting the pace for a slide show

(INTERVAL)
You can set the time the slides are displayed
on the screen.
1
Press DISPLAY twice while viewing a
JPEG image or when the player is in
stop mode.
The Control Menu appears.
2
Press X/x to select
(INTERVAL), then press ENTER.
The options for "INTERVAL" appear.
3 ( 1 2)
1( 4)
2 9 / 1 0 / 2 0 0 6
NORMAL
NORMAL
FAST
SLOW 1
SLOW 2
3
Press X/x to select a setting.
The default setting is underlined.
• NORMAL: sets the duration to between
6 to 9 seconds.
• FAST: sets a duration shorter than
NORMAL.
• SLOW 1: sets a duration longer than
NORMAL.
• SLOW 2: sets a duration longer than
SLOW 1.
4
Press ENTER.
Note
Some JPEG files, especially progressive JPEG files
or JPEG files of 3,000,000 pixels or more, may take
longer to display than others, which may make the
duration seem longer than the setting you selected.
Selecting the slides' appearance
(EFFECT)
You can select the way the slides are
displayed during a slide show.
1
2
DATA CD
JPEG
3
4
Press DISPLAY twice while viewing a
JPEG image or when the player is in
stop mode.
Press X/x to select
then press ENTER.
The options for "EFFECT" appear.
3 ( 1 2)
1( 4)
2 9 / 1 0 / 2 0 0 6
MODE 1
MODE 1
MODE 2
MODE 3
MODE 4
Press X/x to select a setting.
The default setting is underlined.
• MODE 1: the image sweeps in from top
to bottom.
• MODE 2: the image sweeps in from left
to right.
• MODE 3: the image stretches out from
the centre of the screen.
• MODE 4: the images randomly cycle
through the effects.
• MODE 5: the next image slides over the
previous image.
• OFF: turns off this function.
Press ENTER.
(EFFECT),
DATA CD
JPEG
59