Table of Contents
Advertisement
Specifications
.............................................................................................................................................................................................................................................................................................................................................................................................................
1)
Note:
This unit works only in the band between 774 MHz and
798 MHz (TV channels 59, 60, and 61).
The output connectors and LEDs (connection indicators)
with the markings 62, 63 and 64 have no functions.
Frequency range
Antenna input connectors
Antenna output connectors
Antenna input/output impedance
Number of RF distribution
RF distribution loss
Power input connector
Power supply for antenna boosters
Power requirements
Power consumption
1)
Indications
Operating temperature
Recommended operating temperature
Storage temperature
Dimensions
Mass
Accessories supplied
Design and specifications are subject to change without notice.
774 to 798 MHz
BNC-R type (1 each for antennas "a" and "b")
1)
BNC-R type (3 each for antennas "a" and "b")
50 ohms
1)
3 distributions (TV channels 59 to 61) each for
antennas "a" and "b"
0 dB ±3 dB (distributed from the antenna input)
3-pin inlet (1)
DC 12V or 9V, or OFF (switchable),
supplied through the antenna input connectors
AC 220 to 240V, 50 Hz
16 W
6 LEDs for antenna output connection indicators
0°C to +50°C (+32°F to +122°F)
+15°C to +35°C (+59°F to +95°F)
–10°C to +60°C (+14°F to +140°F)
482 × 44 × 300 mm
(19 × 1
× 11
3
/
13
/
inches) (w/h/d)
4
16
(including mounting brackets, but not feet)
Approx. 4.5 kg (9 lb 15 oz)
AC power cord (1)
Operating Instructions (1)
15
Advertisement
Table of Contents
