Displaying the Disc Information (Disc
Explorer)
Notes
• If you press a FOLDER button during playback, the playback
stops and the Disc Explorer appears. In this case, the Resume
Play is not available.
• Even if you have removed the disc from the player, the disc
information of the disc remains on the Disc Explorer until you
load the disc information again by pressing LOAD or place a
new disc in the same slot and play it.
• If you have inserted a disc whose disc information has not been
loaded yet, you cannot select and play the disc on the Disc
Explorer. The player skips the disc whose disc information
differs from the loaded disc information, and plays the next
loaded disc.
• If you load or try to play an empty slot, it appears as a blank in
the Disc Explorer. You cannot select this.
• Even if the disc has a jacket picture recorded on it, the jacket
picture may not appear on the Disc Explorer.
• Do not turn off the player by pressing !. Doing so may cancel
the settings. When you turn off the player, press x first to stop
playback and then press ?/1 on the remote. After the power
indicator lights up in red and the player enters standby mode,
press ! on the player.