Sony 4-165-489-11(1) Operating Instructions Manual page 30

8
Press X/x to select the Control for
HDMI setting, then press
HDMI SETUP
HDMI RESOLUTION:
CONTROL FOR HDMI:
VOLUME LIMIT:
YC C /RGB(HDMI):
B R
AUDIO(HDMI):
JPEG RESOLUTION:
• [OFF]: The Control for HDMI function is
set to off.
• [ON]: The Control for HDMI function is
set to on.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned, then press
SPEAKER FORMATION
STANDARD
• [STANDARD]: Select this when you
install all the speakers normally.
• [NO CENTER]: Select this when you
install the front and surround speakers
only.
• [NO SURROUND]: Select this when you
install the center and front speakers only.
• [FRONT ONLY]: Select this when you
install the front speakers only.
• [ALL FRONT]: Select this when you
install all the speakers in front of the
listening position.
• [ALL FRONT - NO CENTER]: Select
this when you install the front and
surround speakers in front of the listening
position.
To quit the Quick Setup
Press DISPLAY in any Step.
30
GB
.
AUTO
(1920x1080p)
OFF
OFF
ON
OFF
SD
.
Setting the type of video
output to match your TV
Depending on the connection of your TV
(page 26), select the type of video output of the
system.
To select the type of video signal
output from the HDMI OUT jack
When you connect the unit and your TV with an
HDMI cable, select the type of video signals
output from the HDMI OUT jack.
1
Press DVD/CD.
2
Press DISPLAY while the system is
in stop mode.
3
Press X/x to select
then press .
CUSTOM
4
Press X/x to select [CUSTOM], then
press .
CUSTOM
CUSTOM
QUICK
[SETUP],