Troubleshooting
Probable Causes
The Date and Time Setup is set to Manual (NTP
Disabled).
The time zone, date, or time is set incorrectly.
S S c c a a n n n n e e r r E E r r r r o o r r s s
Probable Causes
Scanner is not communicating.
82
Xerox
®
Instant Print Kiosk
User Guide
Solutions
To change the Date and Time to Automatic, enable
NTP in Xerox
®
CentreWare
Set the time zone, date, and time manually.
Solutions
Power off the kiosk, and check the scanner cable.
Wait two minutes and power on the kiosk again.
If the problem is not resolved, contact your Xerox
service representative.
®
Internet Services.
®