Cleaning And Maintenance Of The Device - Silvercrest SFR 37 B1 Operating Instructions Manual

7. Cleaning and maintenance of the
device
DANGER! Risk of electric shock!
The shaving head 3 can be cleaned under running water.
Disconnect the device from the plug-in power unit cable 17
prior to doing so.
The plug-in power unit and the corresponding cable 17 must
not be held under running water and must not be immersed
in other liquids.
WARNING! Risk of material damage!
Do not use any astringent or abrasive cleaning agents.
Do not place excessive pressure on the shaving foils 1. They
are thin and can be damaged easily.
Use the cleaning brush 18 for cleaning the cutter block 16
only. Under no circumstances should the shaving foils 1 be
cleaned with it.
NOTE: to ensure a consistently smooth shave, the device must be
cleaned and maintained regularly.
Cleaning after every dry shave
1. Press both release buttons 4 and take off the shaving foil
frame 2.
2. Tap the shaving foil frame 2 carefully.
3. Clean the cutter blocks 16 with the cleaning brush 18.
4. Place the shaving foil frame 2 on the device in such a way
that it locks into place.
16
GB