Press v/V to select [Yes] and press
The image is exported.
Press ENTER when the
confirmation screen is displayed.
The image is copied to the specified
Avoid doing the following while an image is being
exported. Doing so may damage the photo frame,
memory card, or data:
– Turning off the power
– Removing an memory card
– Inserting another memory card
• You can change the thumbnail size in the image list
] on the remote control (except for
• Any device that is not recognized by the photo
frame is shown in gray and you cannot select it.
Deleting an image
Press MENU when an image you
want to delete is displayed on the
Using the remote control (except
(DELETE) when an image you
want to delete is displayed on the screen.
The screen for deleting an image
described in step 2 below is displayed. Go
to step 3.
Press B/b to select the
tab, select [Delete] with v/V, and
Press v/V to select [Delete this
image], [Delete multiple images] or
[Delete all images] and press
If you select [Delete this image], the
image currently displayed is deleted. Go
to step 6. (This item cannot be selected on
the Slideshow display.)
If you select [Delete multiple images], you
can select the image you want to delete
from the image list. Go to step 4.
If you select [Delete all images], an image
list with check marks in the check boxes
for all the images is displayed. Go to step
/b/v/V to select the image to
be deleted from the image list, and
"✔" is added to the selected image.
If you want to delete multiple images at a
time, repeat this step.
If you want to clear the selection, select
the image and press ENTER. "✔"
disappears from the image.