Monitor Image - Sony Ipela SNC-RZ50N User Manual

Focus control
To focus on a nearby object, press
distant object, press
By pressing , the focus is set to the
optimum position.
Note
To control the focus manually, set Focus mode of the
Camera menu to Manual. (page 36)
Trigger
(Displayed only when the camera Viewer mode
(page 46) is set to Full and one or more triggers are
enabled in the Trigger menu (page 61).)
Select the function you want to use from the drop-down
list and click . The selected function is activated.
The selectable functions are as follows:
– send the still images to an FTP server (page 25)
– send the still images attached to an e-mail (page 25)
– record the still images on a CF memory card (not
supplied) or an ATA memory card (not supplied)
(page 25)
– switch the alarm output on/off (page 26)
– switch the Day/Night function on/off (page 26)
– play the audio file stored in the camera (page 27)
Transmission (TCP/UDP
transmission mode)
(Displayed only when the camera image is in MPEG4
and the ActiveX viewer is used.)
Each click switches the transmission mode of the video/
audio data between TCP mode, UDP (Unicast) mode,
and UDP (Multicast) mode. (page 27)
The last selected mode is saved in the computer, and will
stay selected for the next startup.
Volume
(Displayed when Microphone (page 36) is set to On.)
Drag the bar to adjust the volume.
When you click , the icon changes to
audio output stops. To output the audio, click
. To focus on a
.
and the
again.
Note
If does not appear when the Java applet
viewer is used, Audio codec may not be set to G.711 (64
kbps) (page 36), Codec in the Alarm buffer menu is set
to MPEG4, or Java may not be installed correctly.
To check if Java is installed correctly, refer to "Java
applet viewer" of "About viewers" on page 16.

Monitor image

The image shot by the camera is shown here. The date
and time is displayed at the top of the window.
19
Configuration of Main Viewer