Table of Contents
Advertisement
Mount the Base
You can mount the base on a flat, horizontal surface such as a
desktop or workbench with an optional DIN rail.
Mounting hardware required:
• DIN rail
• 3/16-inch diameter x 5/8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
1.
Slide the DIN rail into the slot on the bottom of the
base.
2.
Secure the DIN rail to the flat surface with the hardware.
8
Advertisement
Table of Contents
