About "Infolithium" Battery Pack - Sony FD Mavica MVC-FD200 Operating Instructions Manual

necessary, depending on the design of
the wall outlet (wall socket) [b].
AC-L10A/L10B
Watching the playback picture on
TV
If you want to view the playback
picture on a TV, you need a TV having
a video input jack and a video
connecting cable.
The color system of the TV must be
the same as that of your digital still
camera. Check the following list:
NTSC system
Bahama Islands, Bolivia, Canada,
Central America, Chile, Colombia,
Ecuador, Guyana, Jamaica, Japan,
Korea, Mexico, Peru, Surinam,
Taiwan, the Philippines, the U.S.A.,
Venezuela, etc.
PAL system
Australia, Austria, Belgium, China,
Czech Republic, Denmark, Finland,
Germany, Holland, Hong Kong,
Hungary, Italy, Kuwait, Malaysia, New
Zealand, Norway, Poland, Portugal,
Singapore, Slovak Republic, Spain,
Sweden, Switzerland, Thailand, United
Kingdom, etc.
PAL-M system
Brazil
PAL-N system
Argentina, Paraguay, Uruguay
SECAM system
Bulgaria, France, Guiana, Iran, Iraq,
Monaco, Russia, Ukraine, etc.
86
About "InfoLITHIUM"
battery pack
What is the "InfoLITHIUM" battery
pack?
The "InfoLITHIUM" battery pack is a
lithium-ion battery pack that has
functions for communicating
information related to operating
conditions between your camera and
the AC adaptor/charger (optional).
The "InfoLITHIUM" battery pack
calculates power consumption
according to the operating conditions
of your camera and displays the
remaining battery time in minutes. If
you use the AC adaptor/charger
(optional), it will calculate and display
the operation time and charging
completion time also.
Charging the battery pack
• Be sure to charge the battery pack
before you start using your camera.
• We recommend charging the battery
pack in an ambient temperature of
between 10°C to 30°C (50°F to 86°F)
until the POWER ON/OFF (CHG)
lamp goes out, indicating that the
battery pack is fully charged. If you
charge the battery pack outside of
this temperature range, you may not
be able to efficiently charge the
battery pack.
• After charging is completed, either
disconnect the AC power adaptor
from the DC IN jack on your camera
or remove the battery pack.