Sony HANDYCAM DCR-SX60 User Manual page 78


Notes
If you set [SCENE SELECTION], [WHITE BAL.] setting is canceled.

WHITE BAL. (White balance)
You can adjust the color balance to the brightness of the recording environment.
Steps
In recording mode,
 AUTO
OUTDOOR ( )
INDOOR ()
ONE PUSH ( )

Notes
Set [WHITE BAL.] to [AUTO] or adjust the color in [ONE PUSH] under white or cool white fluorescent

lamps.
When you select [ONE PUSH], keep framing white objects while

flashes slowly if [ONE PUSH] could not be set.

When [ONE PUSH] was selected, if

[AUTO].
If you set [WHITE BAL.], [SCENE SELECTION] is set to [AUTO].

Tips

If you have changed the battery pack while [AUTO] was selected, or taken your camcorder outdoors after

inside use (or vice versa), select [AUTO] and aim your camcorder at a nearby white object for about 10
seconds for better color balance adjustment.
(OPTION)
 
The white balance is adjusted automatically.
The white balance is appropriately adjusted for the following recording
conditions:
Outdoors

Night views, neon signs and fireworks

Sunrise or sunset

Under daylight fluorescent lamps

The white balance is appropriately adjusted for the following recording
conditions:
Indoors

At party scenes or studios where the lighting conditions change quickly

Under video lamps in a studio, or under sodium lamps or incandescent-

like color lamps
The white balance will be adjusted according to the ambient light.

Touch [ONE PUSH].
 Frame a white object such as a piece of paper, to fill the screen under the
same lighting conditions as you will shoot the subject.
 Touch [ ].
flashes quickly. When the white balance has been adjusted and stored in
the memory, the indicator stops flashing.
keeps flashing after touching
7
[WHITE BAL.] a desired setting

is flashing quickly.
, set [WHITE BAL.] to
 