Table of Contents
Advertisement
Camera Control Unit (CCU) Rear Panel
O/I (main power) switch
1
Switches the main power of the camera on or off.
S-VIDEO OUTPUT connector (mini DIN 4-pin)
2
Outputs an S-VIDEO (Y/C video) signal.
3
VIDEO OUTPUT connector (BNC-type)
Outputs a composite video signal.
4
NTSC/PAL select switch
Selects the output video signal from NTSC or PAL.
5
FLASH connector
Connects the cable of a flash lamp.
6
CAMERA connector (10-pin)
Connects to the CAMERA connector on the CHU using
the supplied camera cable.
7
IEEE 1394 (digital interface) connector
Connects to a computer via an IEEE 1394 cable (not
supplied).
* This connector cannot be used for connection to camera equipment
with a DV connector.
* This connector is not compatible with bus power.
10
– DXC-S500 Product Information Manual
NTSC
CAMERA
PAL
FLASH
IEEE
FS2
1394
OUTPUT
REMOTE
*
(6-pin)
OFF
ON
VIDEO
S VIDEO
FS1
TRIG IN
FS2 connector (D-sub 9-pin)
8
Reserved for future use.
FS1 connector (stereo mini jack)
9
Connects to the optional FS-20 foot switch.
TRIG IN (trigger input) connector (BNC-type)
10
Used when an external device, such as a slave unit,
generates the trigger signal. When using a flash lamp
in INPUT mode, connects a slave unit to the TRIG IN
connector.
11
~AC IN socket
Connects to the AC power cord.
Ventilation opening
12
~ AC IN
Advertisement
Table of Contents
