Changing the function of the buttons
Changing the operation of the AEL button
The function of the AEL button can be selected from the following two
functions:
– Holding the locked exposure value by pressing the AEL button while
the button is held down ([Hold]).
– Holding the locked exposure value by pressing the AEL button until the
button is pressed again ([Toggle]).
MENU button t
Notes
• While the exposure value is locked,
viewfinder. Be careful not to reset the setting.
• The [Hold] and [Toggle] settings affect the manual shift (page 78) in the manual
exposure mode.
• When [Toggle] is selected, be sure to press the AEL button again to release the lock.
Changing the function of the AEL button
The function of the AEL button in focus check Live View mode can be
selected between [Focus Magnifier] (default setting) and [AEL].
MENU button t
desired setting
Changing the function of a focus hold button to the preview
function
If you use a lens equipped with a focus hold button, you can change the
function of the button to preview a shot.
MENU button t
1 t [AEL] t Select the desired setting
appears on the LCD monitor and in the
1 t [Func. of AEL button] t Select the
1 t [Focus Hold Button] t [D.O.F.Preview]
149