Installation Of Fire; Unpacking The Fire - Flavel Atlanta FBFR MN Series Installation And Maintenance Instructions Manual

2.1

UNPACKING THE FIRE

Carefully lift the fire out of the carton. Remove the loose item packaging carefully from the front of
the appliance.
IMPORTANT:
DO NOT UNDER ANY CIRCUMSTANCES USE THIS APPLIANCE IF THE GLASS PANEL
IS BROKEN OR NOT SECURELY FIXED TO THE FIREBOX.
Check the contents as listed: -
Packing Check List
1off Fire box / burner assembly
1off Fascia Assembly & Ashpan Cover
Flue Terminal unit – pack 2 of 2
1off
Loose Items pack – containing :-
1off
2.2 FIRE PLACE OPENING
The front opening of the fireplace must be between 410 and 420mm wide, and between 550 and
560mm high. If the opening exceeds these dimensions then a surround must be constructed from
suitable non-combustible material to produce a suitable sized opening. Any surround must be
suitably sealed to the wall or fireplace to prevent leakage. See fig.3
Fig. 3
620min

INSTALLATION OF FIRE

THE CARDBOARD FITMENT THAT IS AT THE TOP OF THE
CONVECTION APERTURE SHOULD NOT BE REMOVED UNTIL THE
APPLIANCE IS FULLY INSTALLED AND READY TO BE LIT.
480min
Fire opening
410min
420max
SECTION 2
1 off Flue pipe gasket
4 off No.12 x 65mm fixing screws
15 off No.8 x 10mm fixing screws
4 off rawplugs
1 off 6mm Allen Key
1off Right Hand Supply Pipe
1off cable fixing kit
1 off heat deflector plate
550min, 560max
8
Minimum flat
sealing area