Main Settings - Main Settings 2; Usb Connect - Sony DSC-T200 Cyber-shot&reg Handbook

Settings
Main Settings — Main Settings 2
The default settings are marked with

USB Connect

Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable for multi-use terminal.
PictBridge
Mass Storage
Auto
COMPONENT
Selects the video signal output type from SD and HD(1080i), according to the TV connected
(page 81).
HD(1080i)
SD
For details on the operation 1 page 67
.
Connects the camera to a PictBridge compliant printer
(page 102). When you connect the camera to a computer, the
copy wizard starts automatically, and the images in the
recording folder on the camera are copied to the computer.
(with Windows XP/Vista, Mac OS X)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 90).
The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 90 and 102).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the setting to [Mass
Storage].
Selects this item to connect the camera to a 1080i-capable
High Definition TV.
Selects this item to connect the camera to a TV that is not
compatible with an HD(1080i) signal.
73