Changing "Image Transfer" Settings; Copying Images Without Using "Image Transfer - Sony Cyber-Shot DSC-P32 Operating Instructions Manual
Digital still camera
Hide thumbs
Also See for Cyber-Shot DSC-P32:
- Service manual (44 pages) ,
- Manual (8 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Changing “Image Transfer”
settings
You can change “Image Transfer” settings.
Right-click the “Image Transfer” icon on
the task tray, select [Open Settings]. The
settings you can set are as follows: [Basic],
[Copy], and [Delete].
Right-click here
When the “Image Transfer” starts, the
below window appears.
When you select [Settings] from the above
window, you can only change the [Basic]
setting.
Copying images without
using “Image Transfer”
– Windows 98/98SE/2000/Me
If you do not set to launch “Image Transfer”
automatically, you can copy images as
following procedure.
a Double-click [My Computer],
then double-click [Removable
Disk].
The contents of the “Memory Stick”
inserted in your camera appear.
• This section describes an example of copying
images to the “My Documents” folder.
• When the “Removable Disk” icon is not shown,
see the right column.
• When using Windows XP, see page 85.
b Double-click [DCIM], then
double-click the folder that the
image files you want to copy
are stored.
The folder opens.
c Drag and drop the image files
into the “My Documents”
folder.
The image files are copied to the “My
Documents” folder.
• When you try to copy an image to a folder in
which an image with the same file name is
stored, the overwrite confirmation message
appears. When you overwrite the existing
image with the new one, the original file is
deleted.
When a removable disk icon is
not shown
1 Right-click [My Computer], then click
[Properties].
The “System Properties” screen appears.
• For Windows 2000 users, click the [Hardware]
tab on the “System Properties” screen.
2 Confirm if other devices are already
installed.
1 Click [Device Manager].
2 Double-click [
Other Devices].
3 Confirm if there is a “
Sony
DSC” with a
mark.
3 If you find either of the devices above,
follow the steps below to delete them.
1 Click [
Sony DSC]. (In case of
Windows 2000, right-click [
Sony DSC].)
2 Click [Remove]. (In case of
Windows 2000, click [Uninstall].)
The “Confirm Device Removal”
screen appears.
3 Click [OK].
The device is deleted.
Try the USB driver installation again using
the supplied CD-ROM (page 79).
Page 84
Hide quick links:
Advertisement
Table of Contents
