Choosing Images To Print; Print (Dpof) Mark; On The Single Screen; On The Index (Nine-Image) Screen - Sony Cyber-Shot DSC-P32 Operating Instructions Manual

Choosing images to
print

– Print (DPOF) mark

Mode selector:
You can designate certain images to be
printed.
This mark is convenient when you want to
print images at a shop that conforms with
the DPOF (Digital Print Order Format)
standard.
Control button
MENU
Mode selector
• You cannot mark movies (MPEG movie) or
images recorded in Clip Motion mode.
• In E-Mail mode, the print (DPOF) mark is
marked on the normal size image that was
recorded at the same time.
• When you mark images shot in Multi Burst
mode, all the images are printed on one sheet
divided into 16 panels.
70

On the single screen

a Set the mode selector to
b Display the image you want to
print with b/B.
c Press MENU.
The menu appears.
d Select [DPOF] with b/B, then
press z.
The
image.
Zoom buttons
e To mark other images, display
the image you want to mark
with b/B, then press z.
To delete the
In Step 4 or 5, press z again. The
mark disappears.
.
mark is indicated on this
VGA
101 2/9
DPOF
Exit
OK BACK/NEXT
mark
On the Index (nine-image)
screen
a Set the mode selector to
and press the zoom W (index)
button once to switch to the
Index (nine-image) screen.
b Press MENU.
The menu appears.
c Select [DPOF] with B, then
press z.
d Select [Select] with b/B, then
press z.
• You cannot mark using the [All In Folder]
option.
e Select the images you want to
print with v/V/b/B, then press
z.
The green mark is indicated on the
selected image.
SELECT MOVE TO NEXT
MENU
f To mark other images, repeat
Step 5 for each of them.