Authentication/Deleting The Record; Authentication; Entering The Passkey - Sony DSC-FX77 Operating Instructions Manual
Bluetooth function
Hide thumbs
Also See for DSC-FX77:
- Operating instructions manual (116 pages) ,
- Service manual (37 pages) ,
- Service manual (61 pages)
Table of Contents
Advertisement
Authentication
What’s a passkey
Passkey is used to authenticate two
Bluetooth devices that have not previously
connected to each other and create a trusted
relationship between them.
You need to enter the same characters
(passkey) to each device on passkey
authentication process.
Once authentication of the device has been
confirmed, the camera registered the device
as a record. Since then you can connect the
device without entering a passkey.
• To ensure proper security, the passkey
entry has a time limit (30 seconds),
based on the Bluetooth standards.
• The passkey entry may be required when the
authentication valid period of the camera on
other device is expired, the record is deleted, or
the security setting is changed.
• Passkey entry may be required, depending on
devices, each time you intend to connect.
• This “Passkey” is also referred to as a
“Bluetooth passkey” etc. “PIN” is also used
with the same meaning.
When the passkey entry screen
appears on your camera before it
appears on the other device
Enter the desired passkey on your camera.
Then, enter the same passkey on the other
device.
When the passkey entry screen
appears on the other device
before it appears on your camera
Enter the desired passkey on the other
device. Then, enter the same passkey on
your camera.
When the passkey entry screen
appears on your camera and the
other device at the same time
You can enter the passkey on either one.
Enter the same passkey on your camera and
the other device.
Authentication/Deleting the record
Entering the passkey
Enter the passkey when the passkey entry
screen appears.
a Select the desired character
with v/V/b/B, then press z.
The selected character is entered.
INPUT THE PASSKEY WITHIN 30 SECS.
~
}
O K
0
1
2
3
4 BACK SPACE
5
6
7
8
9
DELETE ALL
EXIT
OK
CHARACTER SELECT
MENU
b Repeat Step 1 as many times
as needed to enter the desired
passkey.
c Select [OK] with v/B, then
press z.
The passkey entry is completed.
• You can enter a passkey with up to 16
characters, however, you have to enter the
passkey within the time limit (30 seconds). Due
to the time limit, we recommend you use about
a four-character passkey.
• The character types and the number of
characters available depend on the device.
Page 17
Advertisement
Table of Contents
