Download Print this page

Toshiba 4818-T10 Operating System Installation Manual page 3

Hide thumbs Also See for 4818-T10:

Advertisement

2. Installing Windows 10 (32 and 64 bit)
The Windows 10 installation process fully supports the Toshiba Global Commerce Solutions 4818-T10
Models. No special considerations need to be made when installing the operating system. You can use the
following method to install the operating system.
Requirements
Windows 10 installation DVD
USB Keyboard and Mouse
External USB CD/DVD drive (if DVD feature not installed)
Configuring BIOS setup
To configure BIOS setup, complete the following steps:
1. Power on the system and enter BIOS setup by pressing the <DEL> key during POST.
2. Enter the 'Advanced' page.
3. Set the 'OS Selection' item to 'Windows 8.X/10' option.
4. Press <F10> key to save and restart.
Installing the Windows 10 drivers
Toshiba Global Commerce Solutions required drivers for Windows 10
Intel INF (Chipset) Driver
Intel VGA Driver
Realtek Audio Driver
Realtek Ethernet Driver
Intel TXE Driver
Nuvoton Serial Driver
Install the drivers in the following order.
1. Install the Intel INF (Chipset) Driver
2. Install the Intel VGA Driver
3. Install the Realtek Audio Driver
4. Install the Realtek Ethernet Driver
5. Install the Intel TXE Driver
6. Install the Nuvoton Serial Driver
If USB 3.0 operation is required, an additional BIOS setting must be modified. Follow the steps below to configure
the system for USB 3.0 operation.
To configure BIOS for USB 3.0 operation, complete the following steps:
1. Power on the system and enter BIOS setup by pressing the <DEL> key during POST.
2. Enter the 'Advanced' page.
3. Enter the 'South Cluster Configuration' sub-page.
4. Enter the 'USB Configuration' sub-page.
5. Set the 'XHCI mode' item to 'Enable' option.
6. Press <F10> key to save and restart.

Advertisement

loading