Table of Contents
Advertisement
For Your Information
Precautions
72
For Your Information
Special notice
Do not move, lift up the system, or disconnect the AC
power cord while it is operating. Especially, do not
subject it to vibration or shock while the system is
reading data. This may cause reading errors or
malfunction of the CD-R/RW disc.
On installation
• Avoid placing the filing system in a location subject
to:
– vibration
– high humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
On operation
• Operate the filing system on 120 V AC 60 Hz only.
• Do not move the system while it is operating as this
may cause a malfunction.
• The filing system is designed to operate horizontally.
Never attempt to operate the filing system in a tilted
position.
• Do not place heavy objects on the filing system.
• If the filing system is brought directly from a cold
location to warm location or placed in an extremely
warm or humid room, moisture may condense inside
the unit. In such cases the filing system will probably
not work properly and may even develop a fault if
you persist in using it. If moisture condensation
occurs, turn off the power and do not use the filing
system for at least one hour.
On cleaning
Clean the cabinet, panel and controls with a soft dry
cloth, or a soft cloth lightly moistened with a mild
detergent solution. Do not use any type of solvent,
such as alcohol or benzine, which may damage the
finish.
Advertisement
Table of Contents
