Loading The Bts Software Remotely - Huawei Airbridge BTS3606E Commissioning Manual

Airbridge BTS3606E&3606AE
System Commissioning Guide

3.3.8 Loading the BTS Software Remotely

Task Description
Load the configuration files and BTS running software into the BTS from the LMT.
Prerequisites
Before starting the LMT, ensure that:
Operation Procedure
Step 1 Put the configuration files and BTS running software to the following directories:
Step 2 Log in to the BAM by using the LMT.
For details, see 3.3.4 "Starting the LMT."
Step 3 Execute the following commands to load BTS software.
Step 4 After the loading is successful, exit the LMT.
----End
Issue 02 (2006-10-10)
The BAM server is operational.
The WS is installed with the LMT software.
The communication between the WS and the BAM is normal.
Configuration files: \cdma2000\BTSLoad\cfg (by default)
BTS software: \cdma2000\BTSLoad\BTS3606 (by default)
Execute the command DLD CBTSSW to load only or load and activate the specified
BTS running software or configuration files.
Execute the command DLD CBTSALLSW to load only or load and activate all the
running software or configuration files of the specified BTS.
The loading of the BTS software does not affect the service.
The service is affected if you activate the BTS software.
Huawei Technologies Proprietary
3 Commissioning Process
3-17