Performing The Bss Reverse Maintenance - Huawei Airbridge BTS3606E Commissioning Manual

3 Commissioning Process
Step 1 On the service maintenance system, execute the command STR BTSTELPROXY to start the
Telnet proxy for the BTS to be maintained.
Step 2 In the Run dialog box, execute the command Telnet hostname port to connect to the BCKM.
The Telnet window is displayed.
Step 3 After the BCKM is connected, log in to the BTS by using the following user name and
password:
Step 4 After successful login, execute the command opnday to enable predictive text input for
commands and execute commands in the Telnet window to maintain the BTS.
Step 5 Close the Telnet window.
Step 6 On the service maintenance system, execute the command STP BTSTELPROXY to stop the
Telnet proxy.
----End

3.3.6 Performing the BSS Reverse Maintenance

Task Description
By using the reverse maintenance function, you can maintain the entire BSS system at the
BTS side.
Prerequisites
Before performing the BSS reverse maintenance, ensure that:
3-14
The duration of the Telnet proxy is defined in this step. If this duration expires, the Telnet proxy stops.
The hostname is the IP address of the BAM. The port is the port number set in the first step.
User name: system
Initial password: system
The WS and the BAM are in the same TCP/IP network.
The communication between the WS and the BAM is normal.
The OML between the BTS and the BAM is set up.
Huawei Technologies Proprietary
Airbridge BTS3606E&3606AE
System Commissioning Guide
Issue 02 (2006-10-10)