Figure 3-4 Internet Protocol (Tcp/Ip) Properties - Huawei Airbridge BTS3606E Commissioning Manual

Airbridge BTS3606E&3606AE
System Commissioning Guide
Step 4 Choose Internet Protocol (TCP/IP) and click Properties.
The Internet Protocol (TCP/IP) Properties dialog box is displayed, as shown in Figure 3-4.

Figure 3-4 Internet protocol (TCP/IP) properties

Step 5 In the General tab, choose Use the following IP address and set the IP address according to
the following requirement.
Issue 02 (2006-10-10)
If the WS is used for local commissioning, the IP address must be in the same segment as
the IP address (172.16.16.16 by default) of the local operation and maintenance. The
mask of the subnet must be set to 255.255.0.0. The IP address of the gateway is not set
by default.
Huawei Technologies Proprietary
3 Commissioning Process
3-9