Figure 3-3 Local Connection Properties - Huawei Airbridge BTS3606E Commissioning Manual

3 Commissioning Process
Prerequisites
To configure the WS, ensure that:
Operation Procedure
The WS mentioned in the procedure is installed with Windows XP.
To configure the IP address of the WS, do as follows:
Step 1 Choose Start > Control Panel.
Step 2 Double-click Network Connections.
The Network and Dial-up Connections interface is displayed.
Step 3 Right-click Local Connection and choose Properties.
The Local Connection Properties dialog box is displayed, as shown in Figure 3-3.

Figure 3-3 Local connection properties

3-8
The WS is installed with the Windows operating system.
The network adapter of the WS works normally.
Huawei Technologies Proprietary
Airbridge BTS3606E&3606AE
System Commissioning Guide
Issue 02 (2006-10-10)