Azoteq IQ Switch ProxSense Series IQS213EV03 User Manual

IQS213EV03 Evaluation Kit User Manual
1 INTRODUCTION............................................................................................................................................. 1
2 STANDALONE/DATASTREAMING EV-KIT ....................................................................................................... 1
3 STANDALONE OPERATION ............................................................................................................................ 2
4 DATASTREAMING OPERATION ...................................................................................................................... 3
5 REFERENCE DESIGNS ..................................................................................................................................... 4

1 Introduction

This user manual describes the operation of
the IQS213EV03 Evaluation Kit. The EV-Kit is
manufactured in five parts, consisting of the
mainboard device, and four separate swipe
plug-in module boards. To visualise raw data
from the EV-Kit, the main board can be
interfaced to any personal computer with USB
support, and IQS213 software GUI.
purpose of the IQS213EV03 EV-Kit is to help
application and development engineers
evaluating the IQS213 proximity, touch and
swipe sensor, in both self-capacitance and
projected capacitance modes.
2 Standalone/Datastreaming
EV-Kit
Figure 2.1 illustrates
mainboard and a plug-in swipe module board.
Simply plug in the desired swipe module board
and turn on the power switch, as depicted in
Figure 2.2
Features included in the IQS213EV03:
Modular design: Connect one of the
supplied plug-in
mainboard, to evaluate and compare
swipe performance
Reference designs for IQS213 with user
proximity, touch and swipe detection ability
Four separate module boards to evaluate
2 or 3 channel swipe operation, in either
projected capacitance mode, or self-
capacitance mode
Copyright © Azoteq (Pty) Ltd 2012.
All Rights Reserved.
IQ Switch
ProxSense
®
IQ Switch - ProxSense

Table of Contents

The
in
the evaluation kit
modules into the
IQS213EV03 Evaluation Kit User Manual
®
®
Series
®
Series
Figure 2.1
Used in Data Streaming Mode:
EV-KIT requires Mini-USB cable
Powered by supplied battery, or by Mini-
USB cable
IQS213EV03
Mainboard
Figure 2.2 IQS213EV03 EV-Kit and
Plug-in Module
Revision 1.0
IQS213EV03 EV-Kit
IQS213EV03
Swipe module
Page 1 of 5
September 2012