Dvd Player With S Video And Audio Connectors - Sony WEGA KV-36XBR800, WEGA KV-40XBR800 Operating Instructions Manual

Sony operating instructions fd trinitron wega tv kv-36xbr800, kv-40xbr800
Hide thumbs Also See for WEGA KV-36XBR800, WEGA KV-40XBR800:
Table of Contents

Advertisement

DVD Player with
S VIDEO and Audio
Connectors
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
DVD player
Notes on Using This Connection
To Do This ...
Watch the DVD player
Set up the TV remote control
to operate the DVD player
Activate the TV remote
control to operate the DVD
player
Control DVD functions with
the TV remote control
Label video inputs to easily
identify equipment connected
to the TV
34
Use this connection if your DVD player does not have component
video (Y, P
, P
) jacks.
B
R
To connect a DVD player with A/V connectors
1
Use an audio cable to connect the DVD player's audio output
jacks to the TV's audio input jacks.
2
Use an S VIDEO cable to connect the DVD player's S VIDEO jack
to the TV's S VIDEO jack.
S VIDEO
cable
Audio cable
Do This ...
Press
TV/VIDEO
repeatedly to select the DVD input (VIDEO 1 in the
illustration).
If you have a non-Sony DVD player, you must program the remote control.
See "Programming the Remote Control" on pages 43-44.
Open the outside cover, as shown on page 42. Then set the A/V slide switch
to the position you programmed for the DVD player.
See "Operating a DVD Player" on page 61.
See the instructions for setting up Video Labels on pages 74-75.
TV

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

36xbr800 - 36" crt tv

Table of Contents