Sony WEGA KV-36XBR800, WEGA KV-40XBR800 Operating Instructions Manual page 26

TV
A/V cable
Notes on Using This Connection
To Do This ...
Watch cable (unscrambled)
channels
Watch cable box (scrambled)
channels
Watch the VCR
Set up the TV remote control
to operate the cable box or
VCR
Activate the remote control to
operate the cable box or VCR
Control specific cable box and
VCR functions with the TV
remote control
Label video inputs to easily
identify equipment connected
to the TV
VCR
Do This ...
Press TV/VIDEO repeatedly to select the cable input (UHF/VHF in the
illustration).
Turn on the VCR and tune it to the channel the cable box is set to (usually
channel 3 or 4). Press TV/VIDEO
in the illustration). Use the cable box to change channels.
Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the
illustration).
If you have a non-Sony VCR, you must program the remote control. See
"Programming the Remote Control" on pages 43-44.
For the cable box, press SAT/CABLE
cover, as shown on page 42. Then set the A/V slide switch to the position
you programmed for the VCR.
See "Operating a Cable Box" on page 61 and "Operating a VCR" on page 60.
See the instructions for setting up Video Labels on pages 74-75.
Splitter
(not supplied)
Coaxial
cable
Cable box
Coaxial
cable
Cables are often
color-coded to connectors.
Connect red to red,
white to white, etc.
repeatedly to select the VCR input (VIDEO 1
FUNCTION. For the VCR, open the outside
CATV
cable
25