Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sony wega KV-AZ212
Summary of Contents for Sony wega KV-AZ212
- Page 1 2-687-422-E2 (1) Trinitron Color TV Operating Instructions • Before operating the unit, please read this manual thoroughly and retain it for future reference. KV-AZ212 © 2006 Sony Corporation...
-
Page 2: Specifications
Screen size (cm) Dimensions (w/h/d, mm) 589 × 472 × 515 Mass (kg) Design and specifications are subject to change without notice. Made in Malaysia. Sony Corporation 1-7-1 Konan, Minato-ku, Tokyo 108-0075, Japan. KV-AZ212M91 Output: 1 Phono jacks; 1 Vp-p, 75 ohms Output: 1 Phono jacks;... - Page 3 B WARNING • Dangerously high voltages are present inside the TV. • TV operating voltage: 110 – 240 V AC. • Do not plug in the power cord until you have completed making all other connections; otherwise a minimum leakage current might flow through the antenna and other terminals to ground.
-
Page 4: C Getting Started
Getting Started Insert the batteries (supplied) into the remote. Note • Do not use old or different types of batteries together. Connect the antenna cable (not supplied) to 8 (antenna input) at the rear of the TV. Tips • Your TV can receive both TV and FM radio signals from the •... - Page 5 Setting up your TV (“Initial Setup”) When you turn on your TV for the first time, the “Начальная настройкa” (“Initial Setup”) menu will appear. You may change the menu language, preset the TV channels automatically, sort or edit the channels and adjust the picture position using the buttons on the remote control or TV top control panel.
- Page 6 Setting up your TV (“Initial Setup”) (continued) d) If you wish to edit the channels, press to change to edit mode. Press b until the mode that you wish to edit is highlighted: Label, Skip, Then press 1) To label, press V or v to select the alphanumeric characters for the label.
-
Page 7: Connecting Optional Components
E Connecting optional components Connecting to the video input terminal ( t ) TV front panel (MONO) TV rear panel MONO) Notes • If you connect a VCR to 8 (antenna input), preset the signal output from the VCR to the program number 0 on the TV (see M). -
Page 8: Connecting To The Monitor Output Terminal ( T)
Connecting optional components (continued) Connecting to the monitor output terminal ( T ) TV rear panel MONO) MONO) Connecting to the component video input terminal ( TV rear panel (MONO) Notes • If your DVD player can output interlace and progressive mode signals, select the interlace output when connecting to either 525i/60Hz or 625i/50Hz interlace signals. -
Page 9: F Troubleshooting
• Check the antenna cable and connection on the TV, VCR and at the wall noisy sound (see E). • Check the antenna setup. Contact a Sony dealer for advice. • Display the “Channel Setup” menu and select “Manual Program” to preset the channel again (see M). - Page 10 (switch) to your TV (see E). • Count the number of times the 1 (standby) indicator flashes. The 1 (standby) indicator on your Press ! (main power) to turn off your TV. Contact your nearest Sony TV flashes red service center. several times after every three seconds.
- Page 11 G Using the remote control and basic functions PROG WEGA GATE RETURN Button Description 1 ?/1 Turn off temporarily or turn on the TV. Display the TV program. Jump to last program number that has been watched for at least five seconds. PROG +/–...
- Page 12 Using the remote control and basic functions (continued) Button Description WEGA GATE menu operations Confirm selected items. WEGA GATE Display or cancel WEGA GATE menu. V, v, B, b Select and adjust items. RETURN Return to the previous level. Timer operations Set TV to turn on automatically according to the desired period of time (max.
- Page 13 H TV top control, front and rear panels TV top control panel WEGA GATE (MONO) TV front panel (MONO) Button/Terminal Function Turn off or turn on the TV. Remote control sensor. Wake Up indicator. Standby indicator. Headphone jack. Video input terminal 2. PROG +/–...
-
Page 14: Introducing The Wega Gate
I Introducing the WEGA GATE navigator WEGA GATE is a gateway that allows you access to preset TV channels, connected external inputs, FM Radio mode and “Settings” menu. WEGA GATE External Inputs FM Radio Settings Select Confirm How to use WEGA GATE WEGA GATE External Inputs FM Radio... - Page 15 J “Settings” Adjustment You are able to change the settings of your TV from “Settings” in WEGA GATE menu. Press WEGA GATE button to display WEGA GATE menu. Press V or v to select “Settings” and press The following is an overview of the items that can be adjusted. “Picture”...
- Page 16 K Changing the “Picture” setting The “Picture” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Make sure the “Picture” icon ( Press V or v to select the desired item (e.g., “Picture Mode”), then press Select “Picture Mode”...
- Page 17 Changing the “Picture” setting (continued) Adjusting the “Picture Adjustment” items under “Custom” mode Press V or v to select either “Picture” (contrast), “Brightness”, “Color”, “Hue” (color tones) or “Sharpness”, then press Selecting “Reset” will set your TV to the factory settings. Press V,v,B or b to adjust the setting of your selected item, then press Repeat the above steps to adjust other items.
- Page 18 L Changing the “Sound” setting The “Sound” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Sound” icon ( ), then press Press V or v to select the desired item (e.g., “Sound Mode”), then press Select “Sound Mode”...
- Page 19 M Changing the “Channel Setup” setting The “Channel Setup” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Channel Setup” icon ( Press V or v to select the desired item (e.g., “Auto Program”), then press Select “Auto Program”...
-
Page 20: Presetting Channels Manually
Changing the “Channel Setup” setting (continued) Presetting channels manually After selecting “Manual Program”, select the program number to which you want to preset a channel. (1) Make sure “Program” is selected, then press (2) Press V or v until the program number you want to preset appears on the menu, then press Select the desired channel. - Page 21 N Changing the “Setup” setting The “Setup” menu allows you to adjust settings below. Press WEGA GATE and select “Settings”. Press V or v to select the “Setup” icon ( Press V or v to select the desired item (e.g., “Language”), then press Select “Language”...
-
Page 22: Viewing Teletext
O Viewing Teletext Some TV stations broadcast an information service called Teletext which allows you to receive various information, such as stock market reports and news. You can use the buttons on the remote to view Teletext. PROG WEGA GATE RETURN (red, green,... -
Page 23: Enjoying Stereo Or Bilingual Programs
P Enjoying stereo or bilingual programs You can enjoy stereo sound or bilingual programs of NICAM and A2 stereo systems by using the A/B button. PROG WEGA RETURN GATE Note • If the stereo sound is noisy when receiving a stereo program, select “Mono”. The sound becomes monaural, but the noise is reduced. -
Page 24: Listening To The Fm Radio
Q Listening to the FM Radio You are able to listen to the FM radio stations using your TV. To access to FM Radio mode: Press WEGA GATE button and select “FM Radio” (see I). Press FM button on the top control panel (see H). To exit from FM Radio mode: Press WEGA GATE button, select the desired items: “TV”... - Page 25 2-687-422-12 (1) Trinitron Color TV Инструкция по эксплуатации • Перед работой с устройством внимательно прочтайте инструкцию и сохраните её для дальнейшего использования. KV-AZ212 © 2006 Sony Corporation...
- Page 26 Y:1 Vp-p, 75 Ом, несбалансированный, отрицательная синхронизация C: 0,286 Vp-p, 75 Ом Гнезда RCA; Y: 1 Vp-p, 75 Ом, отрицательная синхронизация : 0,7 Vp-p, 75 Ом : 0,7 Vp-p, 75 Ом Стерео минигнездо Измерения по диагонали Измерения по диагонали http://www.sony.net/...
- Page 27 • Внутри телевизора очень высокое напряжение. • Рабочее напряжение телевизора: 110-240 В переменного тока. • Во избежание утечки электроэнергии через антенну и другие разъёмы не подключайте кабель питания до тех пор, пока вы не выполнили все остальные подключения. • Во избежание протекания батарей и повреждения пульта дистанционного управления...
- Page 28 Установите батареи (прилагаются) в пульт ДУ . • Не используйте одновременно старые и новые батареи или Подключите антенный кабель (не прилагается) к 8 (вход для антенны) на задней панели ТВ. • С помощью этого телевизора можно принимать • Вы также можете подключить ТВ к другим дополнительным Подключите...
- Page 29 При первом включении ТВ на экране отображается меню “Начальная настройкa” . Можно изменить язык меню, автоматически настроить телевизионные каналы, сортировать или редактировать каналы, отрегулировать положение изображения, используя кнопки пульта дистанционного управления или верхней панели управления телевизора. Нажимайте кнопки V или v для выбора нужного языка...
- Page 30 Настройка ТВ (“Начальная настройкa”) (продолжение) d) Если необходимо редактировать каналы, нажмите кнопку редактирования. С помощью кнопок b выберите требуемый элемент редактирования: Метка, Пропуск, (знак блокировки). Затем нажмите кнопку 1) Нажмите кнопку V или v для выбора буквенно-цифровых символов для метки. Затем...
- Page 31 (MONO) MONO) MONO)
- Page 32 Подключение дополнительных компонентов (продолжение) MONO) (MONO) MONO) (MONO)
- Page 34 Устранение неисправностей (продолжение)
- Page 35 PROG WEGA GATE RETURN 1 ? 1 PROG +/– 0 – 9 100 300 1k 3k 8k 100 300 1k 3k 8k 100 300 1k 3k 8k...
- Page 36 Использование пульта ДУ и базовые функции (продолжение) WEGA GATE V v B b RETURN V v B b...
- Page 37 WEGA GATE (MONO) (MONO) PROG +/– V,v,B,b WEGA GATE PROG MONO) MONO)
- Page 38 V v B b –PROG+...
- Page 41 Изменение параметров “Изображение” (продолжение) V v B...
- Page 44 Изменение установок “Настройка каналов” (продолжение) V v B...
- Page 46 PROG WEGA RETURN GATE...
- Page 47 PROG WEGA RETURN GATE NICAM NICAM NICAM NICAM...
- Page 48 PROG WEGA RETURN GATE V v B b...
Need help?
Do you have a question about the wega KV-AZ212 and is the answer not in the manual?
Questions and answers