Place Safety Pod; Spray Cleaning Solution - Cleanmate S 5000 User Manual

3. Operating CC901
1 Loop one end of the
Safety Tether to end A
on the CC901 Power
Cord and tight.
CAUTION:
* If the length of the power cord restricts CC901 ' s movemt, a CC901 Extension Cord can be used. Disconnect end A
and end B, and connect them with both ds of the Extension Cord respectively and tight.
* Only one Extension Cord can be used for CC901 .
3.5 Place the Safety Pod
Wipe the surface of the Safety Pod's suction cup clean with the provided Finishing Cloth.
If CC901 is being used to clean an inside window:

Press the Safety Pod FIRMLY on the top corner of the inside window.
Make sure the Safety Pod is attached securely in Place.
If CC901 is being used to clean an outside window:

Press the Safety Pod FIRMLY on the inside of the window being
cleaned. Makesure the Safety Pod is attached and securely in place.

3.6 Spray Cleaning Solution

CAUTION:
* CC901 is recommded to be used with CC901 Cleaning Solution. Using other cleaners may reduce CC901's
performance.
* Spray the upper and lower sides of the Cleaning Pad with the provided CC901 Cleaning Solution times each. After
spraying, wipe the bottom of CC901 with a dry cloth.
B A
2
Connect end A and end B and tight.
6
3
Loop the other end of the Safety Tether
around the Safety Pod's channel and
pull it tight.